[This review was collected as part of a promotion.] I love this bit it last a decent time an pretty easy to find local
by
Recommended
Customer review from dremel.com
Feb 3, 2023
Love this bit!
[This review was collected as part of a promotion.] I bought this a few weeks ago and it has changed my carving game on my 3 D signs.
by
Recommended
Customer review from dremel.com
Feb 3, 2023
1/8 tungsten carbide bit
[This review was collected as part of a promotion.] I have used the tool to put the numbers on a mailbox and to create a hole for the post.
by
Recommended
Customer review from dremel.com
Nov 13, 2020
1/8” Wonder!
I found a way to break 11/2” of drill bit in 2” of steel. Looked at “rescue bits” and then saw this for $8 and on the shelf @ Home D, figured it was worth a try. It took some time but I was able to cut out the steel and the cobalt drill bit while still maintaining reasonable integrity of the hole. This is one sharp, tough little bit and it saved my butt. Turns the steel into a fine powder. Like any cutting burr it did occasionally do the “very rapid ring around the rosie” routine but that was probably more the limp wristed user than the bit. After all that cutting the bit is in the Dremel box ready for another challenge. Photo shows the hole nearing half depth that I had to grind out. I was impressed.
by
Recommended
1 found this review helpful
May 26, 2020
Cuts through anything
I had a rusted 3/4 bolt stuck that I had broken an ez-out hardened bolt extractor off flush with the surface trying to remove it. Drill bits would break or couldn't drill into the extractor. This bit on the dremel with some time cut through the hardened tool steel and remainder of the bolt. Amazed at how well it worked and help up to the hardened steel.
by
Recommended
Dec 21, 2018
I used this round and clean some holes drilled in 1/4" and 3/8" aluminum bars (i got tired of sta...
I used this round and clean some holes drilled in 1/4" and 3/8" aluminum bars (i got tired of stamped aluminum door handles braking - so i built the outside handle out of solid aluminum bars of different widths and thickness.
by
Verified Purchase
Recommended
Feb 14, 2024
Used to remove broken extractor inside broken spark plug.
by
Verified Purchase
Sep 23, 2023
Great for carving
[This review was collected as part of a promotion.] I’ve had this bit for over a year and it still works great.
by
Recommended
Customer review from dremel.com
Mar 9, 2023
Great addition!
[This review was collected as part of a promotion.] When attached to my 4000 dremel, with the plunge router base, engraving is a breeze!
by
Recommended
Customer review from dremel.com
Mar 3, 2023
wood carving
[This review was collected as part of a promotion.] bought to use with my dremel rotary tool for carving wood. just what I needed to make job easier
by
Recommended
Customer review from dremel.com
Mar 3, 2023
Great biit
[This review was collected as part of a promotion.] I started engraving mirror and glass and this bit came in really handy. It works very good. I’ve done several projects with it and is still sharp.
by
Recommended
Customer review from dremel.com
Feb 23, 2023
MY FAVORITE!!!
[This review was collected as part of a promotion.] I bought this in a double pack, and instantly I was hooked with the first use. I am still using the first one from the pack. I have used it on wood, plastic and metal, and it's just as sharp as it was when I took it out of the package.
by
Recommended
Customer review from dremel.com
Feb 17, 2023
Great cutting tool
[This review was collected as part of a promotion.] I bought to cut out wood . Does well milling out wood
by
Recommended
Customer review from dremel.com
Feb 16, 2023
Buttery Goodness
[This review was collected as part of a promotion.] I bought this out of necessity. So glad I did. With 7 doorknobs to install and no pre cutouts for the locking mechanism, the Dremel 200 made quick work on this project.
by
Recommended
Customer review from dremel.com
Feb 10, 2023
Fantastic carving bit
[This review was collected as part of a promotion.] I bought this for general carving and then found it did a superior job on any fine carving I wanted to do. It is very sharp and leaves a good surface.
by
Recommended
Customer review from dremel.com
Feb 3, 2023
Most used in my set great bit!!
[This review was collected as part of a promotion.] I have purchase about three of these in the last 5yrs +,and they are still like new
by
Recommended
Customer review from dremel.com
Jan 26, 2023
by
Verified Purchase
Aug 27, 2022
junk
Two bits broke, none actually cuts ceramic tile as stated.
by
Recommended
Jul 15, 2022
couldn't cut the metal on a hotwheels truck
I bout this a few days ago for my son to make some custom pulling trucks for his 4H display, he was trying to cut a place in the hood for an engine to stick out, he got maybe 1/2 through the cut and the bit had no more cutting teeth on it.We had high hopes for it but it turned out to be a waste of money.
by
Response from Dremel Jul 25, 2022
Thank you for leaving your comments and we apologize for this poor experience. We are here to help you with the bit and make it right.
We did reach out to you through email, if this issue wasn't resolved please contact us.
Call our Customer Service Team at 1-800-437-3635, we are available Monday - Friday 8 am to 5 pm central standard time or contact us through our website. https://www.dremel.com/en_US/customer-support
Customer review from dremel.com
Jul 10, 2022
by
Verified Purchase
Jun 30, 2022
by
Verified Purchase
May 29, 2022
I thought it'd work better then it did
It just didn't take the material off the aluminum like i expected without really having to dig it in as my dremel continously staled out.
by
Verified Purchase
May 25, 2022
NUMBER 1 WAY TO IMPROVE THIS WOULD BE...
This works as designed all around pretty solid bit. Especially with the abuse i subject it to. I know it is advertised to do things more like trimming SS sink inserts and what not.Though, a hobby of mine is blacksmithing and metal work8ng. I have shaped a lot of relatively tough hard ferrous metals with this bit and its held up well. The only thing that could use some improvement is the price. Or a multipack thats cheaper. Different thicknesses would be ideal.
by
Verified Purchase
Recommended
Apr 20, 2022
PERFECT TOOL
FITS PERFECTLY. EXCELENT
by
Verified Purchase
Apr 16, 2022
by
Verified Purchase
Mar 22, 2022
by
Verified Purchase
Mar 8, 2022
Ok could be cheaper for what it is
It was ok but could have lasted longer than it did on hardened steel
by
Verified Purchase
Recommended
Mar 1, 2022
Worked as expected. Needed to shave ceramic tiles on a...
Worked as expected. Needed to shave ceramic tiles on a backsplash for the outlets. This bit and a Milwaukee m12 vacuum made short work of the project.
by
Verified Purchase
Feb 14, 2022
I bought this for the purpose of trimming my metal...
I bought this for the purpose of trimming my metal door locks and deadbolt strike plates. It worked well but be sure to take it slow and do not overheat the bit. I’ve done three door and it’s holding up well
by
Verified Purchase
Feb 8, 2022
This bit on a "Dremel" type rotary grinder was perfect...
This bit on a "Dremel" type rotary grinder was perfect for prepping a tight area for welding.