Questions and Answers for STERLING 34 in. x 1.875 in. Curved Bar with Wide Grip in Matte Silver

A:  I can not say for sure that this will fit that shower wall. They were made to work with the Accord backer in place shower walls. All I can suggest is to order it and if it does not fit , return it.

A:  Hi, this is Laura with Sterling Plumbing. I am happy to assist you with your question. The 80012134-N grab bar is designed for use with the Accord family of products. It may not be compatible with the Ensemble units. Thank you for choosing Sterling.

A:  Yes it should, make sure it has a wood reinforcement piece in back of the back wall.

A:  Hi, this is Laura with Sterling Plumbing. I am happy to assist you with your question. This grab bar is compatible with the 72290100-0; however, this wall-set set does not have Age-in-Place backer bars for installing grab bars. We would recommend choosing model 72290106-0 which does have factory installed backer boards. In lieu of backer boards, please follow the installation guide regarding adding support for the grab bar. https://bit.ly/2S7Yv3W Thank you for choosing Sterling.

A:  Not sure check with shower manufacturer.

A:  Check with manufacturer.?

A:  Hi, this is Laura with Sterling Plumbing. I am happy to assist you with your question. This bar is designed for the Accord models, however, there are no backerboards installed in this model. The following models have boards installed for the installation of this bar: 71154103-V/N, 71154106, and 71154100. Thank you for choosing Sterling.

A:  No, this unit is not compatible with the model you specified.

A:  Yes it is curved and does require a curved grab bar. A supportive backing must be installed on the wall studs before the shower surround is placed. It is necessary for the strength and proper support/ function /safety of the Grab bar. The only grab bar I found for the sterling shower surround is the Sterling grab bar.

A:  Hi, this is Laura with Sterling Plumbing. I am happy to assist you with your question. Grab bars that are recommended for your unit are: 80001012 12" Grab Bar, 80001018 18" Grab Bar, 80001024 24" Grab Bar, 80011032 32" Grab Bar, 80001036 36" Grab Bar, and 80012134 34" Grab Bar. Thank you for choosing Sterling.

A:  This bar is for the curved back wall,you need to have backer boards on the outside to screw into to make it sturdy

A:  Hi, this is Laura with Sterling Plumbing. I am happy to assist you with your question. The curved grab bar is available in matte silver and nickel; it is not available in dark bronze of oil-rubbed bronze. Please work with your local The Home Depot for pricing and availability on this product. Thank you for choosing Sterling.

A:  This bar is for a specific shower wall, curved back wall with support blocks in the wall.

A:  This bar works for any Sterling Accord 60-inch shower or shower/tub combo with the curved back wall. The depth of the kit isn't important, just the width of the curved section of the back wall.

A:  Hi bj, my name is Sarah with Sterling. I'm glad to answer your question. This can be used in a 36x60 shower. Thank you for choosing Sterling.

A:  Yes. It's the only one I could find to horizontally fit the curved back.

A:  Hello, my name is Jelane with the Sterling Customer Service. I am happy to assist you with your Sterling Plumbing 34 in. Curved Bar with Wide Grip in Matte Silver Model # 80012134-V question. For installation of this bar require that The wall plates on the grab bar must be mounted to a brace between the wall studs. Doing so will ensure that the weight of the user is adequately supported. Please work with your local Home Depot for pricing and availability on this product. Thank you for your inquiry and choosing Sterling Plumbing.

A:  Although my answer is to a question asked 6 years ago, it still applies today. Granted, installing this hand rail AFTER the shower has been installed it going to be tricky, but it can be done. You are going to have to improvise a tool using a good phillips head bit and a small wrench. Make sure you use some heavy duty screw anchors. Install one of the rail brackets. Mark and drill the other bracket holes but do not attach the bracket. Slide the rail onto the installed, then slide the unattached bracket onto the rail. Use tape to hold the rail up where it needs to be. Line up the bracket with the holes and work the screws into the bracket using the screw bit and wrench. Not going to be easy, but it can be done with patience.

A:  Hello, my name is April with KOHLER Customer Service. I am happy assist you with your grab bar question. Sterling Plumbing 34 in Curved Bar with Wide Grip in Matte Silver Model # 80012134-V the installation direction are as follows: Sterling Age-in-Place Surrounds: Obtain backer board locations from the specification sheet for your model. Sterling non-Age-in-Place Surrounds: Obtain backer board locations from the specification sheet for Age-in-Place models. Use knot-free, solid pine boards with a 3/4" (19 mm) minimum thickness. For additional assistance on this inquiry, please contact our Customer Care Center at 1-800-4KOHLER. (1-800-456-4537)