Customer Reviews for Touch 'n Foam 3.5 oz. Polyurethane 2-Component Spray Foam Sealant

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you regarding the kit that did not meet your expectations.

Thank you for posting your feedback. We're sorry to see your low star review on the Touch ‘n Foam Pro System 15 Kit. Based on your commentary regarding the texture/consistency of the foam, the product appears to have been dispensed in an "off-ratio" manner (the blend of A and B components out of specification). The application of off-ratio product can lead to poor foam structure (low expansion, weak/brittle, too soft/poor hardness etc.) The most common reasons for this condition are attempting to spray through a restricted/partially clogged nozzle/line or with improperly activated valves. As indicated in the product usage instructions, DVD and website usage videos: "Spray a small amount of foam on scrap material to check chemical mix. The foam should be off-white in color and be tack free within 30–60 seconds.". This pre-application test guidance is directed to avoid the condition that you describe. Likewise, "If spraying has stopped for more than 30 seconds, foam in the nozzle will begin to cure and clog, and system performance will be compromised". Because you did not provide any background on your application technique, application conditions or project background, it is difficult to provide a more detailed response in this format. Should you have any questions or require additional assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.

Thank you for posting your feedback. We're sorry to see your low star review on the DAP Touch ‘n Foam Pro System 15 Kit. Because you did not provide any details regarding your your experience, it is difficult to provide a proper response in this format. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information regarding your experience.

Thank you for posting your feedback. The Touch ‘n Foam Pro System 15 Kit (as well as other two-component foam products) cure very rapidly, and this kit is only packaged with two application nozzles, the Touch ‘n Foam Pro System 15 Kit is best suited for use in smaller single application projects (not multiple “start and stop applications”). As indicated on the product package label guidance and supporting product literature: "NOTE: If spraying is stopped for longer than 30 seconds, the foam in the nozzle will begin to cure and clog the nozzle. Replace the used nozzle with a new, unused nozzle." Should you have any additional questions or would like to discuss other product options, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.

Thank you for posting your feedback. We're sorry to see your low star review on the DAP Touch ‘n Foam Pro System 15 Kit. Because you did not provide any background on your application technique, application conditions, project background or the reason you were not satisfied with the product, it is difficult to provide a proper response. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information regarding your experience.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. Based on your commentary regarding the texture/consistency of the foam, the product appears to have been dispensed in an "off-ratio" manner (the blend of A and B components out of specification). The application of off-ratio product can lead to poor foam structure (low expansion, weak/brittle, too soft/poor hardness etc.) The most common reasons for this condition are attempting application out of temperature range, spraying through a restricted/partially clogged nozzle/line or with improperly activated valves. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information regarding your experience.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you regarding the kit that did not meet your expectations.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. Based on your commentary regarding the texture/consistency of the foam, the product appears to have been dispensed in an "off-ratio" manner (the blend of A and B components out of specification). The application of off-ratio product can lead to poor foam structure (low expansion, weak/brittle, too soft/poor hardness etc.) The most common reasons for this condition are attempting to spray through a restricted/partially clogged nozzle/line or with improperly activated valves. The Touch ‘n Foam Pro System 15 Kit is filled with sufficient material to dispense a minimum of 15 board feet worth of delivered foam (when properly applied). As the cans are depleted (as with any sealed pressurized vessel) the pressure will drop off rapidly as the contents near depletion. After achieving a full evacuation of the 15+ board feet of delivered foam, there will always be residual chemical in one or both tanks. This condition is normal and expected.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. Because you did not provide any background on your application technique, application conditions or project background, it is difficult to provide a proper response. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information regarding your experience.

Thank you for posting your feedback. We're sorry to see your low star review on the DAP Touch ‘n Foam Pro System 15 Kit. Because you did not provide any background on your application technique, application conditions or project background, it is difficult to provide a proper response. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information regarding your experience.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement for the Touch ‘n Foam Pro System 15 Kit that did not perform satisfactorily.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. We are not clear as to your commentary indicating: "...picking it up from a storage locker..." as well as what appear to be poor storage/handling conditions prior to your attempted application. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you regarding your experience.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kit that did not perform satisfactorily.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kit that did not perform satisfactorily.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. This kit is DAP's smallest two-component spray polyurethane foam kit. As with all two-components kits, coverage is expressed as a board foot, this is defined as 12” x 12” square by 1” thick. A System 15 Kit is designed to provide 15 board feet or 1.3 cu. ft. (theoretical output) when properly applied. Based on your commentary regarding residual material and poor spray performance, it would appear that you may have been attempting to spray through a restricted/partially clogged nozzle. As indicated in the product usage instructions, DVD and website usage videos, "If spraying has stopped for more than 30 seconds, foam in the nozzle will begin to cure and clog, and system performance will be compromised". Because you did not provide any project background or details about your application conditions or technique, it is difficult to provide a more detailed response. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you regarding your experience.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kit that did not perform satisfactorily.

Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. Based on your commentary, it would appear that you may have been attempting to spray through a restricted/partially clogged nozzle and/or hose line. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you regarding your experience.