Customer Reviews for Rust-Oleum Parks Pro Finisher 1 gal. Clear Semi-Gloss Water-Based Polyurethane for Floors (4-Pack)

This is not what we expect to hear! To ensure proper drying, it is essential that no more than two coats of Rust-Oleum Parks Pro Finisher Water-Based Polyurethane for Floors is applied in the same day. Thin, even coats need to be applied at a rate of 600-700 square feet per gallon, as heavier coats will extend any listed cure and dry times. If needing further assistance, please give us a call at 800-901-0411 to talk with us.
- Rust-Oleum Product Support 3

Thank you for reaching out. To prevent hazing, Rust-Oleum Parks Pro Finisher Water-Based Polyurethane for Floors, it is essential that the floor is completely dry prior to coating. We also recommend applying only when air (ambient) temperature is between 60-80 °F (16-27 °C) and relative humidity is below 85%.
- Rust-Oleum Product Support 3

Let's talk about this! To ensure full durability of Rust-Oleum Parks Pro Finisher Water-Based Polyurethane for Floors, a minimum of 3 full coats must be applied. Each gallon has a recommended coverage of 600-700 square feet. If apply to bare wood, your first coat will provide less coverage than the following coats, as bare wood is a more porous surface.
- Rust-Oleum Product Support 3

Thank you for reaching out, Greg. We appreciate you sharing your experinece and feedback with Rust-Oleum Parks Pro Finisher Water-Based Polyurethane for Floors.
- Rust-Oleum Product Support 3

We need to know more to get to the bottom of this, Dave. Rust-Oleum Parks Pro Finisher Water Based Polyurethane for Floors looking milky and scratching easily indicates the coating has not completely cured (dried). When using Parks Pro Finisher, apply thin even coats at a rate of 600-700 square feet per gallon, heavy coats will take much longer to cure. While a minimum of 3 coats is recommended, do not apply more than 2 coats in the same day. Give us a call at 800-901-0411, so we can hear more about your application and try to make things right.
- Rust-Oleum Product Support 6

Let's see what we can figure out! To ensure a great finish and sheen over the entire floor, be sure to thoroughly stir Rust-Oleum Parks Pro Finisher Water Based Polyurethane for Floors before and during use. It is also important to apply using a lambswool applicator pad, polyester brush or weighted T-bar for smooth, even coats. Give us a call at 800-901-0411, so we can hear more about your application, and work to make things right.
- Rust-Oleum Product Support 6

Let see what we can figure out. Rust-Oleum Parks Pro Finisher Satin Water Based Polyurethane For Floors contains a flattening agent that produces the satin finish, be sure to stir thoroughly before and during use, this ensures the flattening agent is well mixed. Water Based Pro Finisher requires a minimum of 3 coats, the final sheen is from the last coat of Polyurethane applied to the floor.
- Rust-Oleum Product Support 6