Customer Reviews for Lutron Skylark LED+ Dimmer Switch for Dimmable LED and Incandescent Bulbs, 150W LED/Single-Pole or 3-Way, Almond (SCL-153P-AL)

works as advertised with simple installation.

Thanks for excellent product

Replaced one that lasted 25 years. Very pleased!

Excellent;I purchased three different Lutron switches and selected this model for the styling and didn’t realize it’s also a 3pole installation, saved me the trouble of buying others. I purchase 90 percent from Home Depot and I’m happy to review all the products.

Works as expected with my particular LEDs. Arrived on time in excellent condition.

not as i thought the switch dim light work half way

Well made switch comes with tinned leads. Super easy to install. Be sure to kill power as 3 way switches can be tricky.

The dimmer switch was exactly what I needed.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Knew exactly what it was when I ordered it, I’ve installed hundreds before, just couldn’t find brown locally. Good standard dimmer without nightlight. I prefer the Diva dimmers but the Skylark is better for elderly and those with poor vision and I was matching existing.

Relatively easy to install and very simple to use.

This dimmer switch was ideal and I was satisfied with the product.

Easy to install and works great. Customer is very happy!

They worked perfectly.

I ordered the wrong one so I returned it. The Home Depot staff were very helpful in the process.

Rating provided by a verified purchaser

It was easy to install and works well

Broken out of box and despite calling Home Depot three times and staying on hold forever, never was able to even begin the return process. Waste of money and I can get them cheaper at local electrical supply place (same exact item) for way less. May be more last Home Depot online order!

Fairly easy install and works great so far.

Excellent in all aspects

Did not dim led lights any more then the non led dimmer that lutron sells.

The Skylark LED dimmer is as easy to install as a non LED dimmer. It was necessary to install because the 2w LED lights were flickering ona regular dimmer. However, it doesn't seem to make much difference with higher wattage LED lights and the lights never dim completely as with a regular setup.

Looked on the Lutron website to see which dimmer switch was compatible with the LED bulbs I use and this was one that fit. What a difference in the performance vs. the dimmer I had been using. I'm glad the old one broke. I will now start to replace the others in the house.

When it comes to Dimmers I only use Lutron. This Skylark model can be used as a 1-way or a 3-way switch. Before the advent of dim-able CFL's or LED we were pretty much limited to incandescent or halogen type bulbs. This switch will do all four. This switch also allows you set the dimming range. There is a small black slide just above the two tabs on the left as you are facing the front of the switch. If necessary you can break off the right side tabs to better fit multiple switches in a single box. If you don't need to break them off leave them on this can affect wattage, see the chart included. The biggest pain with these is the fact that they are about 3 1/4 inches deep which often takes some manipulation. If you are a DIY'er and have an existing set of three way switches, read thru the included instructions and then choose which of the two you want to replace. Bonus: Look for the yellow colored paper and register your switch (s) to extend your limited warranty. The on-off switch allows you to pre-set the slide to a certain setting then just hit the switch on or off. As always safety first and when in doubt , Read The Instructions.

I used 2 out of this 3 pack right away. Put one on the dining room Light/Ceiling Fan and now I can dim the lights down so one can navigate at night. The other went on a track light w/ 3 lights installed in my bedroom. I have LED bulbs and the three spots are really bright, and pointed towards the ceiling, now I can drop the intensity to a warm glow. They install easily. Just always follow the wiring diagram. They seem incredibly durable and not likely to break or crack like some of my wide body switches have. They are priced a bit high, but they serve the purpose of allowing one to get full function from LED lighting.

I have used this product for quite sometime and I will tell you this, it is by far the only one that I would use at my own house or at a jobsite for a customer. It is easy as far as installation is concerned and the look of the product is just great. As far as installing this product, well they could not have made it any easier to do for either the professional or the homeowner.

Very simple installation.

I rated low only because I needed to put this into a 3 gang box with 2 other toggle switches. Could not find a switch plate to work...

Had an old rotary dimmer that's broken. Bought this to replaced it. No problems so far.