Questions and Answers for ZEP 1 Gal. 10-Minute Hair Clog Remover (Case of 4)

A:  For best results, pour product directly in the drain as directed on the label.

A:  No.....I put the kettle on for boiling water. Add product, let sit for 10 min and pour two pints of hot water to flush....done. fumes can be bothersome though.

A:  no. I flush it down later with hot water

A:  No, for best results I run/pour hot water into drain for 30 to 45 seconds; wait for water to lower; and then pour 16 oz of zep 10-min into the drain. Otherwise the zep gets too diluted to work imo.

A:  The ingredients are Water (Solvent); Sodium Hypochlorite (Detergent Additive); Lauramine Oxide (Surfactant – Cleaning Agent); Sodium Hydroxide (pH Adjuster); Sodium Chloride (Thickener); Sodium Carbonate (Buffering Agent); Sodium Lauryl Sulfate (Surfactant – Cleaning Agent); Lauryl/Myristyl Alcohol (Stabilizer); Sodium Caprylyl Sulfonate (Surfactant – Cleaning Agent); Isopropanol (Solvent); Sodium Sulfate (Thickener).

A:  Label says potassium hydroxide and sodium hypochlorite, and elsewhere says go to www.zepcommercial.com for product details and don't mix with ammonia, bleach, acid or any other chemicals.

A:  read the bottle

A:  A cup will usually do it

A:  Start with at least a pint.

A:  Hi, Joey: Thank you for contacting us . I recommend pouring in 16 ounces directly into drain, wait 10 minutes, then flush with hot water. If you have any other questions, please do not hesitate to contact us. Thank you for selecting Zep Commercial for your drain care needs. We appreciate your business! Zep Commercial Customer Support Team

A:  16 oz.

A:  follow the directions. I use 1/4 of the bottle,but that's me.

A:  Yes, I do all the time.

A:  Hi, Alicia: Thank you for your inquiry. The Zep Commercial 10- Minute Hair Clog Remover is formulated for use in sink, tubs, and shower drains. Unfortunately, we do not offer a drain cleaner for the laundry drains at this time. Thank you for selecting Zep Commercial for your drain care needs. We appreciate your business! Sincerely, Zep Commercial Customer Support Team

A:  My washer drains into a utility sink; some washers drain into a stand-pipe. I am able to pour the zep 10-min directly into the sink's drain and I use it in the utility sink drain about twice as often as I do for my other drains. Yes, it works great for me, but only use it if you can pour directly into the drain or stand-pipe. Never pour any of it into your washer imo.

A:  no. the longer the better

A:  It won't damage your pipes cause it doesn't work. It is worthless fluid. You might as well save your money and put it towards a good auger.

A:  No

A:  It dose work but only if it is able to sit on the clog and the clog isn't mixes with soap. It not a replacement for a good drain snake but I'll sometimes try it first before I pull out the snake.

A:  Thank you for contacting us. This product is safe for use in all pipes. However, we do not recommend leaving the product in your drain overnight. We hope this helps. If you have any additional questions or concerns, feel free to contact us. Sincerely, Zep Commercial | Consumer Relations Department