Q:If holding at 39" why use this kit instead of the 73014098 which is much cheaper ?
by|Jul 10, 2017
2 Answers
Answer This Question
A: Thank you for your question. SKU #73014098 is designed for use with a vinyl sleeve and has a larger dimension. A composite post sleeve will not fit over it.
by|May 4, 2023
1 found this answer helpful
A: I just went with what the Home Depot pro services person recommended......wish I would have seen this one. The Veranda one was not the best.
by|May 5, 2023
Q:Can these brackets be installed on the Veranda composite decking. The specs say install wood and concrete surfaces
by|May 10, 2017
5 Answers
Answer This Question
A: Yes. I did
by|May 4, 2023
A: Thank you for your question. Yes, the surface mount bracket can be installed on a composite deck, but will require additional bracing underneath to secure it to the deck, the same as with wood.
by|May 4, 2023
1 found this answer helpful
A: Yes it can, BUT you must add additional framing/reinforcement. I used 5/16ths lag bolts into the rim joist on the 'outside' and added 2 X 6 blocking between the field joists to give a place to screw in the lags on the 'inside'. Simply bolting through the composite decking is a disaster waiting to happen.
by|Oct 9, 2018
A: Yes.
by|May 6, 2023
A: if using on composite, i would use bolts through the composite with washers, composit is generally much softer than wood and not as durable
by|May 5, 2023
Q:Will this kit work with Weatherables vinyl rail kit?
by|Mar 27, 2017
3 Answers
Answer This Question
A: Yes!
by|May 4, 2023
A: Thank you for your question. The post sleeve surface mount has not been tested with Weatherables railing so we cannot advise it is compatible.
by|May 4, 2023
A: Yes
by|May 5, 2023
Q:do the wood comes with the bracket
by|Mar 17, 2017
4 Answers
Answer This Question
A: Thank you for your question. The wood insert is included with the surface mount bracket.
by|May 4, 2023
A: Yes
by|May 5, 2023
A: if ordered as a kit
by|May 5, 2023
A: Yes!
by|May 4, 2023
Q:Based on the cutouts on three sides, which of the many rail kit brackets available will work with this post? The "Traditional Vinyl Rail Stair Bracket Kit" (Store SKU #513390) does not because the screw positions on the bottom rail brackets cause the screws to hit the metal on each side of the cutouts.
by|Nov 24, 2016
4 Answers
Answer This Question
A: wow
i used the genearl vinyl railing bracket, low cost and worked well, except they are white, will have to paint them if fence not white
by|May 5, 2023
A: Thank you for your inquiry. The surface mount bracket kit is designed to work with the Regency/ Enclave hardware kits.
by|May 4, 2023
A: Yes! You may have to drill pilot holes in the metal base depending on the position of the bottom bracket.
by|May 4, 2023
A: Most will work...you can also drill pilot holes through bracket if necessary
by|May 5, 2023
Q:Will it come with Heartwood sleeve
by|Nov 14, 2016
2 Answers
Answer This Question
A: Thank you for your question. No, the surface mount is only for railing installation, not fencing, and does not include a sleeve. It includes the base mount and a wood 4x4 insert.
by|May 4, 2023
A: It's made more for PVC sleeving.
by|May 5, 2023
Q:What are dimensions of the posts?
by|Nov 14, 2016
4 Answers
Answer This Question
A: Post dimension above the bracket is 3 1/2 x 3 1/2 inches
by|May 5, 2023
A: 4 X 4
by|May 4, 2023
A: top is regular 4x4 size about 3.5x3.5
i slipped a 4" vinyl post over it
by|May 5, 2023
1 found this answer helpful
A: The length of the post is 4" x 4" x 4'.
by|May 4, 2023
1 found this answer helpful
Q:can i paint sleaves
by|Nov 2, 2016
4 Answers
Answer This Question
A: sure
by|May 5, 2023
A: Yes, you can paint sleaves.
by|May 4, 2023
A: Yes...they come black
by|May 5, 2023
A: Thank you for your question. You can paint the sleeves with a paint designed for PVC, but we cannot guarantee the long-term performance and it may require frequent touch-ups or re-application.
by|May 4, 2023
Q:Can I get the wood green treated?
by|Oct 30, 2016
2 Answers
Answer This Question
A: I doubt it..... probably only comes with the pine....why would you need it if its an internal sleeve? It should not get any moisture......
by|May 5, 2023
A: Thank you for your question. We do not have pressure-treated wood inserts available.
by|May 4, 2023
Q:I have a composite deck and have double rim joists. Part of the bracket will sit on the inside rim joist. Can I use wood screws to attach, as I cannot drill though to insert a bolt.
by|Aug 13, 2016
2 Answers
Answer This Question
A: Works great.... you want to bolt thru to framing underneath!
by|May 4, 2023
A: Thank you for your question. You may use a 4 inch lag screw at the locations where to mount will sit on a joist.