Questions and Answers for Veranda Surface Mount Bracket and Post Kit

A:  Thank you for your inquiry. The post sleeve surface mount is only designed for use with a composite post sleeve, not with the Veranda vinyl products. Please speak with an associate at the ProDesk at your local store to determine the appropriate post mount for the vinyl application.

A:  Internal wood post with flush mount Beato bracket. Use sleeve over wood.

A:  4 x 4 post can be shimmed to fit

A:  My guess is 12 guage

A:  Really? Its heavy. Maybe 1/8 thick?

A:  Thank you for your question. The brackets is galvanized steel that is .0125" thick.

A:  Thank you for your question. Please contact TimberTech to inquire if this is approved for use with their system and will meet their installation and code requirements.

A:  Thank you for your question. No, the post mounts only come packaged with the wood included as the insert must be planed to fit inside the bracket. A standard wood 4x4 will not fit without modification.

A:  Use wood of your choice...kit comes with post pictured

A:  i bought many of them used in roof top sun deck with grandchildren and is tight and worked great wood was great can buy bracket separately some stores stock just the bracket but in small amounts

A:  Yes with concrete anchor bolts or tap-com screw

A:  Thank you for your question. Yes, the brackets come with concrete wedge bolts to attach to a concrete or brick surface. Bolts for wood or composite surfaces are purchased separately.

A:  Yes...hardware included

A:  Yes, can be fastened to a concrete pad

A:  Thank you for your question. The post sleeve surface mount comes packaged with 1/4" by 3 inch wedge bolts for mounting to a concrete surface.

A:  Yes, when you buy the base and post it comes with concrete fastners as pictured above

A:  anything us generally use as a fence panel i used vinyl and fastners to connect the panels to the post

A:  Thank you for your question, The 48" Regency/ Enclave composite post sleeve (SKU #1000044739) works for this post mount; vinyl post sleeves do not. The correct post cap to ensure a fit on the sleeve is SKU #1000044987, and the trim ring is SKU #1000044990.

A:  is about 42"

A:  Thank you for your question. The post sleeve surface mount bracket will only go to a height of 48 inches and is not designed to hold the weight of a fence panel. We do not recommend it is used in this application.

A:  yes i used 2 1/2" lag bolts

A:  Thank you for your question. Unfortunately, no, these cannot be used if you cannot access under the deck for blocking and bolting. The thickness of the blocking underneath is critical to ensure the posts are secure for weight bearing capability.

A:  Thank you for your question. The post mount is galvanized, so there is potential for rust. If this is a concern, it may be better to mount wood posts to the deck frame instead of using the surface mount bracket.

A:  steel is very heavy and wont bend

A:  steel but i dont believe would ever rust, i live near the gulf of mexico and used these on my 1000 sf deck, worked great