Q:Is the interior stainless steel? If not, will the inside rust?
by|Apr 28, 2024
1 Answer
Answer This Question
A: Hi Kelly! Badger 5 garbage disposal gas has galvanized steel grinding components. These components are coated with corrosion-resistant zinc and do not begin to discolor until this coating wears away. You can view the specifications of this model through this link: https://insinkerator.emerson.com/documents/badger-5-specifications-en-us-10083210.pdf
by|Apr 30, 2024
Q:What disposals have the hard wire and not the plug
by|Apr 25, 2024
1 Answer
Answer This Question
A: Hello! We appreciate your question. All of our disposals with no factory-installed power cord can be hardwired.
by|Apr 25, 2024
Q:What replaced modal s/n 05021895150
by|Apr 24, 2024
1 Answer
Answer This Question
A: Hi! Thank you for the question. Based on the serial number you provided, your disposal was manufactured in February 2005. Unfortunately, we're unable to check its model in our database. Please contact us at https://support.insinkerator.com/app/ask and provide us with the model number of your disposal to further assist you. We'll be happy to help you out!
by|Apr 25, 2024
Q:I need to replace : Model 1-83A Is this the correct one? . Thxs Badger 1 W/C 1/3 HP Continuous Feed Kitchen Garbage Disposal with Power Cord, Standard Series
by|Apr 18, 2024
2 Answers
Answer This Question
A: Yes,
Mike
by|Apr 20, 2024
A: Hi TdeCampo, thank you for your question. This model is the same as the one that you have. Additionally, please check the electrical connection of your disposal to see if you require a new unit with a power cord or not.
by|Apr 19, 2024
Q:Does it have dishwasher drain connection?
by|Apr 17, 2024
1 Answer
Answer This Question
A: Hi Steve, thank you for reaching out to us. This model has a dishwasher drain connection. To connect the dishwasher, you can get a dishwasher connector kit, which is an easy and fast way to connect. You can find the instructions on how to connect the dishwasher to your disposal in step 15 of the installation manual. Here is the link for the manual: https://insinkerator.emerson.com/documents/badger-5-installation-care-use-manual-english-en-us-7832790.pdf
by|Apr 19, 2024
Q:I have model number 1-81 HP 1/3. Do I need to buy a separate power cord?
by|Apr 14, 2024
1 Answer
Answer This Question
A: Thank you for your inquiry, Vivi! The disposer comes with an attached power cord, so there's no need to purchase a separate one. If you have any further questions or concerns, please contact us at https://support.insinkerator.com/app/ask. We'll be more than happy to assist you.
by|Apr 16, 2024
Q:Can plug in cord from my existing in sink era tor be used on new badger 5 which has no cord?
by|Apr 11, 2024
1 Answer
Answer This Question
A: Hi Gerr, thank you for your question. We do not recommend that a factory-installed cord be removed and used on another disposer. The cord is attached using plastic clips that are not meant to be removed. However, we have a power cord kit available that comes with all the necessary components to install a power cord on an uncorded disposer. The model number for this kit is CRD-00.
by|Apr 15, 2024
Q:I have an old Badger 10s disposal that I need to replace. Will this unit easily replace it? It is wired to a switch under the sink. Do I need to get the corded model?
by|Mar 28, 2024
1 Answer
Answer This Question
A: Hi Paul, we appreciate your inquiry. Yes, this model will work as a replacement for your disposal. If you have a hard-wired connection under your sink, you need a disposal without a power cord.