A: Hi! Thank you for the question. Based on the serial number you provided, your disposal was manufactured in February 2005. Unfortunately, we're unable to check its model in our database. Please contact us at https://support.insinkerator.com/app/ask and provide us with the model number of your disposal to further assist you. We'll be happy to help you out!
by|Apr 25, 2024
Q:I need to replace : Model 1-83A Is this the correct one? . Thxs Badger 1 W/C 1/3 HP Continuous Feed Kitchen Garbage Disposal with Power Cord, Standard Series
by|Apr 18, 2024
2 Answers
Answer This Question
A: Yes,
Mike
by|Apr 20, 2024
A: Hi TdeCampo, thank you for your question. This model is the same as the one that you have. Additionally, please check the electrical connection of your disposal to see if you require a new unit with a power cord or not.
by|Apr 19, 2024
Q:Does it have dishwasher drain connection?
by|Apr 17, 2024
1 Answer
Answer This Question
A: Hi Steve, thank you for reaching out to us. This model has a dishwasher drain connection. To connect the dishwasher, you can get a dishwasher connector kit, which is an easy and fast way to connect. You can find the instructions on how to connect the dishwasher to your disposal in step 15 of the installation manual. Here is the link for the manual: https://insinkerator.emerson.com/documents/badger-5-installation-care-use-manual-english-en-us-7832790.pdf
by|Apr 19, 2024
Q:I have model number 1-81 HP 1/3. Do I need to buy a separate power cord?
by|Apr 14, 2024
1 Answer
Answer This Question
A: Thank you for your inquiry, Vivi! The disposer comes with an attached power cord, so there's no need to purchase a separate one. If you have any further questions or concerns, please contact us at https://support.insinkerator.com/app/ask. We'll be more than happy to assist you.
by|Apr 16, 2024
Q:Can plug in cord from my existing in sink era tor be used on new badger 5 which has no cord?
by|Apr 11, 2024
1 Answer
Answer This Question
A: Hi Gerr, thank you for your question. We do not recommend that a factory-installed cord be removed and used on another disposer. The cord is attached using plastic clips that are not meant to be removed. However, we have a power cord kit available that comes with all the necessary components to install a power cord on an uncorded disposer. The model number for this kit is CRD-00.
by|Apr 15, 2024
Q:I have an old Badger 10s disposal that I need to replace. Will this unit easily replace it? It is wired to a switch under the sink. Do I need to get the corded model?
by|Mar 28, 2024
1 Answer
Answer This Question
A: Hi Paul, we appreciate your inquiry. Yes, this model will work as a replacement for your disposal. If you have a hard-wired connection under your sink, you need a disposal without a power cord.
by|Apr 3, 2024
Q:I need to replace my badger 5 1/2 GP garbage disposal. According to the Product details the cord is sold separately but according to the answers to some of the questions this is a factory installed corded unit. Do I need to buy a new cord?
by|Mar 27, 2024
1 Answer
Answer This Question
A: Hi Rita, thanks for reaching out! We offer both corded and uncorded units. This one is uncorded, so you can either buy the power cord kit (model: CRD-00) separately or you can look for a Badger 5 with cord, which is model #79883A-ISE.
by|May 9, 2024
1 found this answer helpful
Q:Price of installation
by|Mar 22, 2024
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer, to better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 p.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Mar 23, 2024
Q:In regard to the Badger 5, can the black rubber top be removed to clean?
by|Mar 18, 2024
1 Answer
Answer This Question
A: Hi Lynn, thank you for reaching out. The rubber on top of your disposer cannot be easily removed because it also serves as a mounting gasket. However, you can purchase the Baffle Upgrade Kit (model BUK-00) to upgrade the mounting gasket on the Badger Series disposer to a removable Quiet Collar baffle. This will allow you to easily remove it from the sink for cleaning purposes.
by|Mar 19, 2024
Q:We are planning to purchase a sink with a 3.5" drain hole. Will the item and flange connection fit?
by|Mar 17, 2024
1 Answer
Answer This Question
A: Hi Jennifer, thanks for reaching out. Yes, the standard 3.5 inches (90mm) sink opening is ideal and the disposer comes with an attachment for that size.