Questions and Answers for EVERMARK Stair Parts 48 in. x 11-1/2 in. x 1 in. Unfinished Red Oak Plain Cut No Return Engineered Stair Tread

A:  Just one

A:  Hi Angel, these treads are sold separately. So the pricing is for one each. If you have additional questions, we'll reply as quickly as we can. Thank you!

A:  Hello Heather, Thank you for your recent inquiry with The Home Depot about Red Oak Engineered Tread. Yes, we do offer hardwood installation on select floors. However, We are not able to provide a price for this project as all projects and customers are different. Please contact us at 1.855.583.0554 for pricing and availability. Thank you for shopping Home Depot. See the following link for more information: https://www.homedepot.com/services/flooring-installation/?NCNI-5&searchRedirect=flooring+installation&semanticToken=20041+++%3E++++st%3A%7Bflooring+installation%7D%3Ast++cn%3A%7B3%3A0%7D++flooring+installation+%7Bredirect%7

A:  Hi Heather, the Associates at the Customer Service desk in your local Home Depot store may have recommendations on hiring an installation professional. We always suggest that you do your due-diligence when hiring subcontractors to do work in your home. If you have additional questions, post them here, and we’ll reply as quickly as we can. Or, you may call our Customer Service Line at 678-455-5188 (M-F, 8-4 ET) where we can assist you with most any question you have. Thank you!

A:  Yes - depending on the store associates availability and how many treads you have. Best case is to just ask.

A:  Hi Heather, ask the Associates in the Lumber/Millwork Department for their assistance with cutting your stair treads. Thank you!

A:  Yes you would do better taking carpet up and sanding and staining then polyurethane them

A:  Hi MMM, ripping the carpet from your stairs and going for a hardwood look is one of the most popular home projects. For tread recovering projects, we recommend our solid red-oak product called "FasTread." Search on Item# 203677241. This product is designed to fit over existing carpet-grade treads once the nosing is removed. We recommend using our "Reversa-Riser" (Item# 300431450) with the FasTread for a clean, finished look to your staircase. If you have additional questions, we’ll reply as quickly as we can. Or, you may call our Customer Service Line at 678-455-5188 (M-F, 8-4 ET) where we can assist you with most any question you have. Thank you!

A:  Mine will be 11 inches.

A:  Hi Bri, usually the stringers are made from 11in to 12in wide boards. If you have additional questions, we'll reply as quickly as we can. Thank you!

A:  Hi Scythe, thanks for the question. These treads are made from 3 or 4 pieces of solid red oak, edge-glued together to form one red oak tread. This increases stability and strength of the tread, as one piece of solid material is more prone to twist, warp, and check. If you have additional questions, we’ll reply as quickly as we can. Or, you may call our Customer Service Line at 678-455-5188 (M-F, 8-4 ET) where we can assist you with most any question you have. Thank you!

A:  It is made of 3 pieces edge glued together.

A:  Yes - but it would require them to use the store's panel saw (like for plywood) so the associate would have to be comfortable in doing it.

A:  Hi Ted, we suggest you contact the folks in the Millwork Department so they can address your issue. If you have additional questions, we’ll reply as quickly as we can. Thank you.

A:  Hi Arador, these treads come in two different widths: 36 in. and 48 in. Since most stairs are not plum, or straight, you may need a little more tread than you realize to get the proper fit. If you have additional questions, we’ll reply as quickly as we can. Or, you may call our Customer Service Line at 678-455-5188 (M-F, 8-4 ET) where we can assist you with most any question you have. Thank you!

A:  Yes, these come in different widths.

A:  You'd have to try one to see. These are solid oak pieces in the middle with an oak veneer over them to give the appearance of a solid piece of wood. The veneer is the typical 1/8" thick, so once your CNC cut through that and into the wood below, you would see the veneer profile in the cut. could b a problem, but maybe not depending on how you finish the design.

A:  Hi Mac, we're unsure too! Know that these treads have an oak hardwood core, made from short lengths obtained from other manufacturing processes, that may not be oriented in the direction you want them to point, or would they have grain that matched what you wanted.

A:  Hello ydtony, your store may stock this SKU: 176659. If not, and you're in a rush, there may be oak boards in the Millwork Department that you can cut-to-fit. If you're not in a rush, you can order these to your home and have them shipped to you. If you have any questions, we'll reply as quickly as we can. Thank you.

A:  Some came damaged but was able to use the other side