Contains 3.5 oz. ($19.09 /oz.)
$66.82
Pay $41.82 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Effective sealant
- Moisture resistant
- 15 Board Foot Polyurethane 2-Component Spray Foam Kit
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
About This Product
Choose an effective, moisture resistant sealant with Touch 'n Foam 2-Component Spray Foam. It expands and cures quickly to fill cavities, gaps, cracks, expansion joints and other sources of air leakage in a building envelope. Resists moisture that can lead to mold or mildew. It also provides increased sound and thermal insulation. Will not shrink, compress, settle or biodegrade like fiberglass or cellulose insulation. Bonds to a variety of materials, including wood, masonry, metal and drywall.
Highlights
- Yields 15 ft. board (1.25 cu. ft.); 5.48 R-value per in.
- Class 1 fire resistance
- Blend of product yield and portability (single carton design with built-in carrying handle)
- Pre-connected hoses for fast set up, very portable
- Ideal for small projects, such as sealing sill plates/band joints or patching previously installed insulation
- Must be applied when surface and air temperatures are above 60 degrees F
- The right insulation can save on energy and heating and cooling bills. Check out our Buying Guide for helpful tips.
- Return Policy
Product Information
Specifications
Dimensions
Cover Area Per Bag (sq. ft.) | 0 sq ft | Coverage Area (sq. ft.) | 15 sq ft |
|---|---|---|---|
Product Height (in.) | 12 in | Product Width (in.) | 5.75 in |
Details
Compatible Install Surface | Cement, Concrete, Existing Drywall, Fiberglass, PVC/CPVC Pipes, Plywood, Wood | Cure Time (hours) | 0 |
|---|---|---|---|
Dry to Touch (min.) | 0 | Install Temperature (F) | 60 |
Insulation Features | Fire Block Rated, Paintable | Insulation R-Value | R5.48 |
Insulation R-Value per Inch | R5.48 | Insulation Type | Spray Can |
Number of Pieces | 1 | Product Weight (lb.) | .218 lb |
Product Weight (oz.) | 3.5 oz | Returnable | 90-Day |
Warranty / Certifications
Warranty Information | Manufacturer warrants this product to be free from defects and shall not be liable for any consequential or other damage or remedy. Our sole obligation and your exclusive remedy are limited to product replacement. For more info. call 1-800-325-6180. |
|---|
Questions & Answers
113Questions
Q:I have a 12x 16 storage building that I am making an art studio. I need a dust free area. What is the best insulation?
by|Aug 29, 2022
1 Answer
Q:have 3/4" copper water line laying flat in attic: want to spray 2" of this foam on exposed area an cover line with existing cellulose 12 deep-want your concerns or advice
by|Jan 12, 2022
3 Answers
Q:Why is this not available for purchase online, and not being restocked in stores?
by|Feb 11, 2021
1 Answer
Q:Is the application flammable?
by|Jan 23, 2021
2 Answers
Showing 1-4 of 113
Customer Reviews
2.9 out of 5
5
59
4
43
3
26
2
25
1
88
Jul 20, 2020
Inconsistent. 2 out of 3 kits malfunctioned
I purchased 3 kits this morning for a small closet project. Two of the kits malfunctioned upon activation. The canister on the right leaked all of its contents after black strap was pulled up to activate kit and I only got about 25% of the product on the wall. The other kit worked well and there was no problem. All 3 kits were good until September 30. Temperature was not an issue as it was 86* today. The product that actually made it on to the wall came out as expected. Not sure why two of the kits malfunctioned and pretty much wasted the product. Disappointed in the performance especially since its not cheap.
by
Response from DAP Product ExpertJul 22, 2020
Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kits that did not perform satisfactorily. When calling in, please have the foam kits available, as we will need to collect production information from them.
Jun 15, 2020
useless crap.
Followed the instructions exactly. When engaging the nozzles, one sprung a leak half way through the process thus spilling nearly all of the contents of that can into the box. Got maybe 1/10 of the foam from the sprayer as I should have.
by
Response from DAP Product ExpertJun 19, 2020
Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kit that did not perform satisfactorily.
Oct 22, 2019
worked great
worked great
by
Feb 6, 2019
Great for Small Projects
If you understand that its only doing 15 board feet, 15 foot by 1 foot by 1 inch thick this was great. I had a commercial product already in place but after removing the chimney needed to fill in behind it. I used 4 of the 15 Board foot product and it worked great i have about 3 inches of protection. Worked just like the video and i couldnt be happier.
by
Dec 16, 2018
not worth getting
followed directions on box, tempature was proper, made sure lines we un-kinked. sprayed nicely. expected coverage of at least 8 bdft from the system 15 and got less than 5 board ft also as curing it's pulling away from the studs. which is a big problem for insulating properly. i can make a can of great stuff go farther than this stuff. maybe the larger kits are better but this product is not worth the cost. i should have listened to all the negative. reviews for this one and stayed away
by
Response from DAP Product ExpertDec 18, 2018
Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. Based on your commentary indicating that the foam "is pulling away" from the application substrate would tend to indicate that the surface may not have been sufficiently clean and/or that the surface was below the product's minimum application temperature. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kit that did not perform satisfactorily.
Jan 27, 2018
Better than Great Stuff
I just finished using this product and it works as advertised. I got 15 board feet out of it and it worked flawlessly. All you have to do is follow the instructions and it works. Make sure you have it right side up for storage and then the proper side down for spraying. I will definitely buy this again and continue to use it.
by
Response from DAP Product ExpertJan 29, 2018
Thank you for your kind words.
We are pleased that your project completed as desired.
Have a great day!
We are pleased that your project completed as desired.
Have a great day!
Oct 1, 2016
Poor design
2 cans each with a blue tube attached to it. 1 can has a coupler in the middle of its blue line that is there I think to slow the flow rate. This coupler came apart under pressure and sprayed everywhere I snapped it back together several times ending with same result. Left me with a unfinished project and a huge mess to clean up.
by
Response from Convenience ProductsOct 3, 2016
Hello Bob - Thanks for reaching out. We're sorry to hear about the issues you've experienced with our System 15 kit. Please contact Touch 'n Foam's customer service department at 800-325-6180. We would like for you to speak with a member of our customer service team so that we may better understand what went wrong and work on making things right. All the best.
Jul 9, 2016
Great!
I used two larger two cylinder packs to insulate a garage I built several years ago. Based on that experience, I used this small pack to insulate the rim joist cavities in my home where a few mice had been nesting. It worked great, covered 15 cavity spaces, so pretty much true to the advertised 15 board feet. It worked great.
by
Response from DAP Product ExpertFeb 2, 2018
Thank you for your positive feedback. Congratulations on a successful project.
Sep 29, 2015
Works fine
I used this to fill in some spots of insulation in a work van that were removed to to some body work. The hardest part about using this is guessing at how much to apply to get enough insulation where you want it. I think the term "theoretical yield" is quite accurate, it's a theory. In my experience, it's closer to 10 board feet, which makes this product kind of expensive. But to be fair, this is cheaper than other stuff I've found. And I followed the temperature recommendations. I had halogen lights on heating the area up.
It applies very easily, and only took a couple of minutes to apply. I wish it didn't cure so fast. For my application, it would have been nice to be able to shape or mold it somewhat.
by
Response from DAP Product ExpertFeb 2, 2018
Thank you for your positive feedback. Congratulations on a successful project.
Aug 4, 2015
Doesn't measure up
After reading the product overview I believed this system would meet my needs.
The attached photo shows an exterior stud bay with the foam in place from the first kit I used.
Bay dimensions are 91" x 9.13" x 3.25" or 1.56 cu. ft. volume. There are DWV pipes in the cavity that measure 2.315 dia. and 136" total length or 0.33 cu. ft. in volume. The net stud bay volume was 1.23 cu. ft.. The kit is listed at 1.25 cu. ft. yield and one kit would be required for the project.
Site conditions were (all degrees F): indoor ambient of 74, outdoor ambient of 76, wall surface of 71, and product temp of 74. All temps were within the recommended temperature range listed in the instruction guide. Product had been allowed to acclimate to site conditions per instructions.
The photo shows approximately 1/2 of the 1.23 cu. ft. space was filled. Unfortunately, some material was lost before second kit arrived when some material liquified and had to be wiped away. This is visible as the tan/brownish foam in the photo. The white foam was as expected.
The second kit arrived and the area was warmer. Unfortunately, the dispensed volume didn't increase with higher temperatures. Indoor ambient was 80, outdoor 93, wall surface was 82 and product was 80. The second kit result was consistent with first one. I still had ~ 25% of stud bay volume without foam insulation in it.
Does this product meet it's own specifications? You be the judge.
by
Response from Convenience ProductsAug 10, 2015
Dear hvac,
We are sorry to read about your unsatisfactory experience.
These are several reasons an applicator may not obtain the desired theoretical yield from a Foam Kit 15.
1. We do not recommend a Foam Kit 15 for air sealing and insulating a large void such as described. There is not enough control and the dispensing is very dynamic.
2. First time users find it difficult to apply spray foam in a smooth even application. Spray Foam is almost always over applied. This reduces total expansion and square foot coverage. Applying spray foam too thick prevents maximum expansion.
We would ask that in the event that you ever feel that Touch 'n Foam is not dispensing as desired, please call our Technical Service department while you are on the jobsite for immediate support.
Thank you!
We are sorry to read about your unsatisfactory experience.
These are several reasons an applicator may not obtain the desired theoretical yield from a Foam Kit 15.
1. We do not recommend a Foam Kit 15 for air sealing and insulating a large void such as described. There is not enough control and the dispensing is very dynamic.
2. First time users find it difficult to apply spray foam in a smooth even application. Spray Foam is almost always over applied. This reduces total expansion and square foot coverage. Applying spray foam too thick prevents maximum expansion.
We would ask that in the event that you ever feel that Touch 'n Foam is not dispensing as desired, please call our Technical Service department while you are on the jobsite for immediate support.
Thank you!
0/0
