Easy to install, all mounting holes lined up and the fan was balanced
Easy to install, all mounting holes lined up and the fan was balanced
by
Verified Purchase
Recommended
Aug 15, 2017
They fit fine and had two set of holes which...
They fit fine and had two set of holes which was great. So far, they are doing great.
by
Verified Purchase
Aug 8, 2017
While installation in place was tricky, the replacement fan blades and hardware went together wit...
While installation in place was tricky, the replacement fan blades and hardware went together without a problem and the fan is once again operating properly.
by
Verified Purchase
Recommended
Jun 28, 2017
Fixed warping problem for fans in screened in porch in...
Fixed warping problem for fans in screened in porch in hot and humid SC. Needed to re drill holes.
by
Verified Purchase
Jun 27, 2017
Although billed as "compatible with most outdoor fans", the hole pattern will not fit either the ...
Although billed as "compatible with most outdoor fans", the hole pattern will not fit either the Hunter or Harbor Breeze fans. The store doesn't carry Westinghouse fans in stock. Since the in store stocked fans don't match the replacement parts carried, one can only conclude that this is a case of the right hand not knowing what the left hand is doing. If the store carries Hunter & Harbor Breeze fans in stock, those brands of replacement parts is what should be carried. On line, ALL brands carried should be supported. If you don't support the brand, don't sell it.
by
Jun 20, 2017
Better than wood, use wood outside it won't last these are plastic and they last much longer than...
Better than wood, use wood outside it won't last these are plastic and they last much longer than wood its worth every penny stores should carry in stock but they do not it must be ordered online.
by
Verified Purchase
Recommended
Jun 13, 2017
These are working great, they do the job and won't bow because they're plastic.
These are working great, they do the job and won't bow because they're plastic.
by
Verified Purchase
Recommended
Jun 7, 2017
They don't fit!!!
They don't fit!!!
by
Verified Purchase
Jun 6, 2017
Hard durable plastic very shiny finish = easy to clean! We knew we would have to drill new holes ...
Hard durable plastic very shiny finish = easy to clean! We knew we would have to drill new holes to match our old fan blades which needed to be replaced when one broke. The old blades were pressed board construction and not as durable as the new Westinghouse outdoor blades - the old ones were actually beginning to split and expand.
We used the old blade holes to draw on the new plastic blades and easily drilled the new holes and installed. Total start to finish took about an hour. We live in the tropics so humidity is an issue - we hope the "outside" plastic durable blades will last a long time. So glad these blades were available on line and arrived quickly.
by
Verified Purchase
Recommended
May 23, 2017
If a product is supposed to function as a replacement for just about any general ceiling fan unit...
If a product is supposed to function as a replacement for just about any general ceiling fan unit, then the holes whereby one would ATTACH the fan to the rest of the unit SHOULD BE more universally located. SHOULD be larger in diameter and slotted so that they could better match up with whatever fan unit one has. The holes in these fan blades are neither. The holes are small, Not slotted and look as if they could only line up with two Very Specific fan brands - NOT Universal. Fortunately I have a drill and had to drill my own holes to get these to fit.
by
Verified Purchase
2 found this review helpful
May 1, 2017
5 Star Review
Rating provided by a verified purchaser
by
Verified Purchase
Apr 13, 2017
worked well for us, best part we can wash them. installing them was simple..
worked well for us, best part we can wash them. installing them was simple..
by
Verified Purchase
Recommended
Apr 11, 2017
Generally pleased with the look of the product and contour of the blade face, but the pre-drilled...
Generally pleased with the look of the product and contour of the blade face, but the pre-drilled holes didn't match my model and the material was extremely difficult to drill. Also, the pre-drilled holes ended up being somewhat noticeable after it was installed and it was impossible to fill so I've just decided to live with them as a "design feature".
by
Verified Purchase
Mar 28, 2017
I had to drill some holes but the blades look...
I had to drill some holes but the blades look really good.
by
Verified Purchase
Mar 28, 2017
Great looking replacement blades. Ore drilled holes worked perfectly....
Great looking replacement blades. Ore drilled holes worked perfectly.
by
Verified Purchase
Jan 31, 2017
All blades are fine and work good.
All blades are fine and work good.
by
Verified Purchase
Recommended
Jan 3, 2017
Worked exactly as promised...
Worked exactly as promised...
by
DIY
Verified Purchase
Recommended
Sep 20, 2016
Disappointed
All of my house fans(6) are Hampton Bay from Home Depot these are not replacement blades for any.
Back to a web search for replacements.
by
DIY
Verified Purchase
Aug 16, 2016
Easy fix for drooping outdoor fan blades
I replaced the drooping blades on my outdoor ceiling fan in about 10 minutes. The original blades were not outdoor blades so they did not last in our high humidity. These new blades are hard plastic, easy to install and look pretty good; much improved over the old blades. A friend of mine saw them and replaced his once he saw how nice these looked.
by
DIY
Recommended
Jun 28, 2016
Holes May Not Match Originals
The pre-drilled holes did not match my original fan blade. I thought about drilling new holes, but since they are made of plastic (outdoor use) and my experience with drilling plexiglass is not so good, I decided not to risk drilling new holes. Each blade had 5 holes to accommodate different hole spacings, so drilling more holes would also probably weaken the blade. The extra holes would also look terrible if the blade arm did not cover them. I'd say that an old original blade should be carried to the store, but, these are "online" only. So ship them to the store and match your blade there so that you know that they will fit or request a refund if they were prepayed.
by
DIY
Verified Purchase
Jun 24, 2016
Replacement blade installation
Blade holes did not align with the recommended blade arms that attach to the fan motor. Had to drill new holes in each blade and ensure that the original holes were not exposed. It took a little time (and patience) but they work fine, and look great.
by
Jun 9, 2016
Fan Blade Purchase
The fan blades appear to be exactly the rifght size with a hole pattern matching the correct pattern.
by
DIY
Verified Purchase
Recommended
May 3, 2016
Outdoor ceiling fan blades
We were thinking that these could be painted. They can't so we are returning them.
by
Apr 6, 2016
looked ugly in package, look nice on the fan!
finally fan blades that don't warp outside on the porch! look really good on our fan.
by
DIY
Verified Purchase
Recommended
Mar 22, 2016
Good replacement blades
These blades were purchased to replace some older blades that had become warped. They were easy to install on our fan. We did have to drill out the mounting holes as per the instructions, but that was eaily done.
by
DIY
Verified Purchase
Recommended
Feb 23, 2016
Great Fan Blades
Replacement fan blades are hard to find. These fit perfect.
by
Verified Purchase
Recommended
Jan 12, 2016
Very good purchase
Product is working fine and looks great. Only drawback was having to drill the blades to install on the fan I have. No major problem
by
Verified Purchase
Recommended
Oct 27, 2015
Replacement fan blades
I am very pleased with my new fan blades. Replacing them, plus a lil white rustoleum paint on the motors, made them look brand new. Only a fraction of the cost of replacing the whole fan .
by
Recommended
Sep 28, 2015
Love the new blades
It was simple to install; it only took my husband about 45 minutes. They were a nice blend with my porch decor.