Customer Reviews for RYOBI One-Way Screw Remover/Installer Set with Sleeve (3-Piece)
- Easily drive and remove one way screws
- Can drive and remove screw sizes #4 to #14 and larger
- Sleeve guide is included for use with larger screws
Customer Reviews
Nov 24, 2022
by
Nov 23, 2022
Bit was better used to install one way screws than...
Bit was better used to install one way screws than to remove them. Worked for the job I purchased it for but had to work at being extra careful not to strip screw maybe due to the application
by
Nov 16, 2022
Easily installs the one way screws, but terrible for removing...
Easily installs the one way screws, but terrible for removing them. I looked up how to do it, tried it different ways, but for the sake of removing the screws. Terrible.
by
Response from RYOBINov 17, 2022
Hello, Connor - We are sorry to learn about your difficult experience with this one-way screw remover/installer set! We recommend referring to the Use and Care Manual at the link below for instructions on how to use this set to remove the screw. We hope this helps! However, if it doesn't, then please feel free to email us directly at Reviews@RYOBItools.com. And thank you for your review!
Use and Care Manual: https://images.thdstatic.com/catalog/pdfImages/62/625f350f-32e7-4a95-b5f0-7b63cb0588d3.pdf
Use and Care Manual: https://images.thdstatic.com/catalog/pdfImages/62/625f350f-32e7-4a95-b5f0-7b63cb0588d3.pdf
Nov 16, 2022
Good quality and easily used....
Good quality and easily used.
by
Nov 10, 2022
One of the places that we can go and get some real service. They may have what you need and they may not but even if they don't sometimes they can order it for you and have it sent to your house. I love going there because they're helpful
I got it to do do what I needed done, I had to use other tools with it to get it to work but I didn't have to spend a lot of money so I definitely appreciate you for being here/there for me. Bishop Elder R. Harvey
by
Nov 9, 2022
As other people said, it did not work for to remove my old screws. So I had to use my plier to remove them one by one and took a ling time. If you are able to grind the screw head deeper, then possibly the bit will be fit more and unscrew better.
Doesn't work. Maybe work for new screws only.
by
Response from RYOBINov 9, 2022
Hello, Alex - We are very disappointed to learn about your frustrating experience with this one-way screw remover/installer set! We want to hear more about this so we can provide you with a good solution! Would you mind sending us an email at Reviews@RYOBItools.com?
Nov 9, 2022
by
Oct 15, 2022
No it didn’t work for me at all...
No it didn’t work for me at all
by
Response from RYOBIOct 17, 2022
Hello, Gman - We are disappointed to learn that this set did not work for you! Would you mind sharing more with us at Reviews@RYOBItools.com? We want to hear more about this, so we can provide you with a good solution.
Sep 17, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Sep 13, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Sep 13, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Aug 6, 2022
Worked very well as described...
Worked very well as described
by
Jul 10, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Jul 7, 2022
by
Jun 22, 2022
One way
Good product and hight quality
by
Jun 16, 2022
Screw Remover
Worked like it was supposed to just wish I had a better driver
by
Jun 15, 2022
Could not make the half- slotted
tool work with the bolts...
Could not make the half- slotted
tool work with the bolts to remove them. Had to drill and tap to remove.
by
Response from RYOBIJun 15, 2022
Hello, Gene - We're disappointed to learn of your unsatisfactory experience with the screw remover/installer set! We want to hear more about this so we can provide you with a good solution! Please be looking for an email from us at Reviews@RYOBItools.com.
Jun 8, 2022
Garbage tool that didn’t work. Ended up using an angle...
Garbage tool that didn’t work. Ended up using an angle grinder and a large flat head screw driver. Might work for installing screws but absolutely will not work for removing them.
by
Response from RYOBIJun 9, 2022
Hello, Nothappy - We're sorry you've had such a difficult and unusual experience with this screw remover/installer set! We appreciate the feedback and would love to get in touch with you regarding this, so we can try to improve it! Please email us at Reviews@RYOBItools.com.
Jun 1, 2022
Slips right over top the screw you cannot hold enough...
Slips right over top the screw you cannot hold enough pressure against the screw to prevent it from sliding Up and over the screwhead
by
Response from RYOBIJun 3, 2022
Hello, Daniel - We're very sorry that you're having trouble using the screw remover! If you would, please ensure you're using the correct driving bit for your screw size, then place the tip of the driving bit onto the head of the one-way screw, and rotate the bit clockwise to install the screw into the drilling surface. Hopefully, this information will resolve the trouble you're having. But if it doesn't, then please contact us at Reviews@RYOBItools.com.
Jun 1, 2022
by
Jun 1, 2022
The removal tool did not work at all. Total...
The removal tool did not work at all. Total waste of money.
by
Response from RYOBIJun 2, 2022
Hello, Louie v - We are disappointed to hear that you did not have the best experience with the screw remover/installer set! We'd be grateful for a chance to discuss this further with you so we can try and provide you with some beneficial support! If you would, please reach out to us at Reviews@RYOBItools.com.
May 14, 2022
by
May 13, 2022
by
May 4, 2022
by
Apr 27, 2022
by
Apr 25, 2022
Can remove one way screws with effort
I got these solely to remove one-way screws and it ultimately ended up working but you have to use some effort. I had a bunch of one-way screws recessed into a safety lock so cutting a flathead notch with a Dremel cutting wheel was not possible. The screws were in various states, both in head integrity and tightness. I put as much pressure as possible on the screw while slowly using an impact driver. WD40 also helped a lot. Try different sizes depending on the state of the screw head.
by
Apr 20, 2022
by
Apr 19, 2022
These bits are not what I wanted they to do...
These bits are not what I wanted they to do They did not fit the screw I was trying to remove. The wrong tool for my job.
by
Response from RYOBIApr 20, 2022
Hello, Homedepotcustomer - We are very disappointed to see that this screw remover/installer set did not meet your expectations! If you would, will you please email us at Reviews@RYOBItools.com? Let's connect so we can provide you with a good solution for moving forward!
Apr 14, 2022
Did not work for me. I ended up grinding a...
Did not work for me. I ended up grinding a groove into the screw head and using a flathead screw driver ro remove 28 one way window guard screws.
by
Response from RYOBIApr 18, 2022
Hello, Flatheadsrule - We are disappointed to hear that this set did not work for you! Would you mind sharing more with us at Reviews@RYOBItools.com? We'd be grateful for a chance to discuss your experience further, so we can try to provide you with a good solution!
Apr 14, 2022
by
Frequently Bought Together
Exclusive
Price:
$13.97
