Customer Reviews for OPTIX 36 in. x 48 in. x 0.093 (3/32) in. Clear Acrylic Sheet

I used this product as a water-proof backing for mounting a distribution manifold during my driveway re-building this past summer. I added hot water loops under the pavement, and wanted something behind the manifold mount to prevent water damage during air-bleeding procedures or in the event of a possible leak. This panel was perfect, and looks great too. Just make sure you pre-drill any holes before screwing or bolting it down.

About a month ago I used this in a custom frame of 74" X 24" for antique Japanese scroll. It was easy to cut with a Dremel tool (wear protective eye wear! Jig saw didn't work for me), clear as glass, not a blemish on it, (leave the protective film on until you're ready to put it in place), and light weight. Saved money not taking it to be professionally framed so we splurged on a custom frame at a local frame shop. Very happy with the finished product!

I used this plex for a large picture frame build, and was ver concerned about scratches. The sheet came with a protective film on either side, which did the job nicely. Suggestion: pull off the protective film as a very last step, and pull it off slowly to prevent static buildup and dust clinging to your project.

It was easy to work with and really sturdy

I bought this to use for a craft and it was excellent.. I made a Spotify frame

We cut the acrylic into long strips to put in our RV bathroom cabinets. It keeps things from falling out, and bc it's clear, we can see what we need.

It is a good sturdy product. Great for the quilting project I was using it for.

I'm unsure if I would recommend this. Because the edges of the items are scraped where they were cut, they look like corrugated cardboard. All four sides have this look. I ordered a few weeks ago and the pieces are super. Smooth edges, well done. But these. Ugh. I will have to get 300+ grit sand paper and rub them smooth, but then they will be frosted, when the other set will be clear like the entire sheet. Bummed. They were both supposed to be from the same company, Optic, but have different labels. The second set (scraped set) is even a little thicker. The 2nd set did not meet my expectations.

I purchased two sheets. One to protect the white grout in the backsplash behind the kitchen sink. It's hardly noticeable leaning against the wall. The second was to cut and use in the bottom of a clear glass bathroom accessory tray that had an uneven surface on the inside. The tray was defective but I wanted it and needed something to smooth out the bottom. The acrylic sheet is very clear so you don't notice it all.

Product as expected. Made a cat entry window access. Easy to cut with proper tool and technique. Now the cat has access to the outside, and main window can still be closed.

Is great for cover for uber Driver’s

I used this product to replace a broken window. It was easy to work with and was able to cut it to the perfect fit. Clear view to the outside. I cut it with a utility blade also known as a box cutter to reduce the odor that it releases if you cut it with a circular saw. I set in clear silicon sealant to finish it off. Looks great in place. Perfect replacement for a broken window.

This product was perfect for making a table top COVID-19 shield used during recruiting interviews.

Functional easy to handle and manipulate material for lots of protection/art projects.

I was looking for this type of item with these or close to dimensions after my polypropylene one disintegrated. My use is a little unorthodox but I needed this to block water from being splashed up against a bedroom door that allows access to the patio. When it rains the water pours off of the roof to in front of the door. Product is expensive but I think it's money well spent and should last many, many years.

My description of this product is based on the fact that it is what I received when I purchased it off the shelf at my local Home Depot in Orlando. It was not in a package. It only had a thin protective film on the Acrylic Sheet. I used the OPTIX 20 in. x 32 in. x 0.093 in. Acrylic Sheet to protect a small wooden table that had been hand painted with a picture on top. I cut the sheet with a fine tooth blade on my table saw. The cut went smoothly with no problem. My table saw surface was clean with no rough edges. The main problem I encountered was with the protective film. The film was very thin and had allowed some minor scratches that were present when I purchased the product. It was also very tedious and time consuming to peal off the film when the cutting was complete.

This is one of the first acrylic sheets that I have found that the plastic cover stayed on while I cut to size so not to scratch the acrylic.

Did not meet my expectation

Nice quality material, surface protected by easily removed sheets of paper. Flexible enough to wrap-around a counter, following the curvature.

I used these to make shielding for a check out counter.

This is not a 2x4! - the dimensions stated should be what you get, right? Evidently NOT; the label, bin description and online says 20 x 32 but what I got (with blue liners) is 20 x 31.5

Used this product at my store's counter as a protective COVID19 barrier between employees and customers. Worked perfect!

Perfect for creating a 60 inch tall by 44 inch wide cross shaped window. It cut easily with a jigsaw and metal cutting blade. No chipping or cracking. Very happy with the end result.

Great product! Exceeded our expectations! We needed a barrier in our office since the covid and this is perfect!!

It's thick and it's strong which was perfect. Only issue was the one I was given (used curbside pickup) had it's film coming off on one side witch made it hard to use because I cut all 4 sides off and made several holes throughout the plate.

This sheet worked out really good for me. I cut it out to put a shield in my car to drive for Uber & Lyft in Houston. Totally Recommend it.

Purchased to make a "sneeze guard " for my friend who runs a business. Looks great and he is thrilled.

This sheet worked well for our needs. I used it to protect the lower half of a screen door from our cats. I used white velco to attach it to the frame. My only complaint is that it's very expensive for a simple sheet of plastic.

This stuff is awesome. It cuts perfectly with a circular saw or fine tooth jigsaw for curves. It has the same appearance and reflective qualities of glass yet is perfect for the do it yourselfer for a lot less money. Replaced the broken glass on the front of my stereo cabinet. No one can tell the difference. Can't say enough and have used it for several projects since!!!!!

This piece of plexiglass was used to create a virus protection screen at the cash registers. It worked perfectly.