Customer Reviews for FAMOWOOD 1 qt. Clear Glaze Coat Epoxy Kit (4-Pack)

Easy to use and great results!

This is a great product. One box did a bar top I built that was 12”x9ft long. Easy to use. Plan on going over it with a 320+ grit to smooth out any dust particles that might settle during the curing process.

the product went on as expected however: i spent 15 minutes stirring in advance and used a heat gun as bubbles appeared and I still got small fizzie bubbles in the end product, I suspect if I had added glitter or such, it wouldn't be noticible.This was an experiment so i've learned a lot. My next project is a table.?

When on simple and looked great. I liked this product

Easy to apply, and the result looks very professional, we did it ourself. It’s better to use the right amount, if used too much of the product then it gets a bit as a glue, otherwise looks and feels like glass.

Excellentttttttttttt!!!!!!

It is a great product and is easy to use it you follow the directions. I use it to encapsulate various objects in a wood turning and it provides a crystal clear surface of approximately 3/8 inch in depth. Great Product.

This is a good product. It has a nice clear finish. I did not have any yellowing. It may setup a little fast more a beginner. I didn’t get the glaze completely level. I would buy this again.

Great epoxy at a good price.

Used it for its intended purpose, and it turned out great!!

Awesome and amazing results.

I used a heat gun and it still bubbled. But overall it still looked good. Just need to buy more and fix that issue.

Great product for any project. Easy to use.

Are you going to bother me asking about everything I buy from the Home Depot? If so, I will do my shopping elsewhere!

Great instructions. Easy to mix, but don’t overmix because the substance will smoke and set up quickly

Easy to use came out Chrystal clear on river table top coat

Rating provided by a verified purchaser

Rating provided by a verified purchaser

we do river tables and other epoxy projects in my class this works wonderfully.

Extraordinary product! Can be used numerous ways. This time I had beautiful cedar lumber from a friend, who milled it on his portable saw mill. The tree had numerous imperfections including separating sprouts at the base of the tree, leaving large openings. This product not only filled all the gaps, but strengthened the boards as well! It made fine edges where the boards’ rough edges could not.

4/5 beacsue 4 out of 5 times it applied very simply. Easy to use, easy to mix, MUST be careful about temp range. Sands really well once given about a week to dry... should you find the coat to rippled or dusty, or whatever. Second and third coats work very very as well, I would suggest using about a 400+grit paper the sanding between coats, unless you have some major issues, then gradually sand your way up to 400s. 1/5- 4th attempt using this was a bad mix, still don't know why, but I had to hand scrape an entire live edge table in order to remove all signs of the gummy mess that did not dry after 5 days in the same temp range/room/environmental conditions as the other uses. All in all, will continue to use, just going to get a scale to get the 1:1 ratio as perfect as possible. and be sure to mix for all 12 minutes as well.