Customer Reviews for Everbilt 1/4 in.-20 Zinc Plated Tee Nut (4-Pack)

Really well made product

This is an excellent product. It was exactly what I needed to attach a hot tub pump to a board with rubber suspension spacers.

looks just like all the other Tee Nuts I have had in my life, have not used these at the moment but I'm sure they will work just fine --- Oh, good price for four.

Okay product! Two of items purchased stripped out the threads!

Life saver! Thank you

This nut caught the rod and held it firmly.

Threads were a little loose as compared to the older ones I was replacing, I had to buy longer bolts for the dinning room chairs that I was fixing up and those new bolts were also a little loose in these T nuts. The last time I used T nuts was 30 years ago in a professional sound system speaker enclosure (for the 15" speaker) these T nuts "ears" seemed to bend very easily as I was hitting them & I was very careful as I was banging them in...the density of the plywood could have cause some of the teeth to sink right in and others to have much more resistance. I noticed this when drilling the holes (some easy others hard) & cutting out the seats in 1/2" plywood. These t nuts need an 8mm drill bit, which I had to go to a local hardware store to buy as HD doesn't carry metric drills Why Not???

Just what I needed to hang my plaster art.

I thought that these would join a 2”x2” leg to a plywood top, but they just pull right off the leg. Worthless. I should have just pocket screwed the leg on.

Much better design than original hardware on the chair

I actually used these to install a door closer on a door that wouldn’t hold screws so I used bolts and these tee nuts worked great

Perfect for what I needed. First time to use these but will definitely use them again in the future. I guess my only request would have been to tell me what size drill bit to use before tapping them in.

Nice and flat on plywood when cinched down

These nuts were well-built and functional. I did not have any issues with their use.

Worked exactly as you'd expect, holds well, pretty easy to install. I was able to add threads to a 1/2 piece of plywood (functionally more like 7/16"), that's as narrow as you can get away with and still have them flush our countersunk.