Customer Reviews for Columbia Forest Products 1/4 in. x 2 ft. x 8 ft. PureBond Mahogany Plywood Project Panel (Free Custom Cut Available)

I’ve been purchasing this same item for years. It seems the quality of this last order/batch was not the same. It didn’t cut very well and I had to redo quite a bit of my orders

Used with Swaner Hardwood 1x6 African Mahogany also purchased from Home Depot to create beautiful wainscot on staircase wall.

I need a solid and even core plywood for my artworks and after searching everywhere, I found the Columbia ply. After putting it through my laser cutter, it performed flawlessly. No gaps in the core, even thickness (critical for lasering) and great finish on the cutting edges. I wished I could just pick it up at the local Home Depot but shipping is free and very well packaged from Columbia. I highly recommend this plywood for fine work. Art of lamp www.artoflamp.com

While building a dovetailed blanket chest out of solid African Mahogany, I needed a piece for the bottom panel. I ordered the Columbia Forest Mahogany plywood (This listing was for the 3/4" plywood but has since changed...) and it was really nice, especially for the money and how fast it was delivered. There were no voids on the different layers of the plywood and the faces of the veneer were spotless. Color was great and took the varnish really well. Highly recommend and will be buying again when I need Mahogany plywood.

Used this product for a laser engraving project. It was perfect. Easy to cut and finish. The project came out absolutely beautiful.

This is a great looking wood. I found with out a vary fine tooth blade, this wood seems to develop a splintered edge. My self I did not run into voids so much as the other reviewer did who has issues, but I did run in to a different issue. Upon cutting it i seemed fine at first, but then warped over night and not like a little warp but a crazy fun house warp. we had to cut a entrance way and 2 ' windows' out So we glued it down to a second sheet with gorilla glue, and let them set over night with the weight of cinder blocks on it. upon removing the cinder blocks, it just popped off the ground, like ha ha, you did not stop my warp. and it was warping in different directions at the same time. so around the doorway we screwed in place 2 x 2 's and 3/4 inch plywood aground the windows and all of the sides had to be screwed into place. In the end it worked, but for all of the extra work, due to its warping, it was both the first and last time ever using this product. This is the wood with the green door in it in the picture. I used it for the first wooden bearded dragon house I ever built. For all of the head achs, I would go with a nice 3/4 or 23/32 AC plywood in the future and did.

Mahogany is not available locally and not at all Home Depot stores, I used it to make a case for a serving set I made for my wife, the wood is a bit more expensive than the other woods carried by Home Depot but the results are astounding. My resultant project is absolutely beautiful everyone that has seen it has asked if I'd consider making them one.

Great quality of wood, nice price and delivered for free if you purchase $45 worth

I cut the board into 6-inch wide strips which I used to conduct stain, dyes, and tints experiments. It took me where I needed to be.

Great product and shipped fast

Turned out very nice

I’m an artist who paints on wood panels. I had my wood custom cut before shipping. The cuts were accurate and the shipping was quick. Great service!

We accomplished our goal of determining which stain to use for our new front door prior to installation

The wood was chipped and warped. This was not useable for the majority of the boxes.

Exactly as pictured and advertised. Arrived in excellent condition and Home Depot employee made two perfect complimentary cuts for us. Good job Home Depot!!

This Mahogany Plywood is exactly what I needed for a small project. The price, including a free custom cut was simply amazing, and the delivery was even better, arriving without shipping charges in only a few days.

The size is closer to 3/16 " than to 1/4 " It is described in small print the size in decimils why???? lets say the size properly it will not fit in a dado of any standard size. could not make it work. Toooo Bad nice finish and color maybe I can use it as veneer.

Product was received with no damage and was perfect for its application and use. Note: this is surfaced on one side.

The coloring is a bit light for mahogany and several of the boards were warped pretty bad.

Arrived in good shape. A little warped, but that’s expected.

Good quality materials and nicely cut but the sheet was thinner than 1/4” making it difficult to plan accurately how to join pieces together.

Arrived quickly, exactly what I needed, all wood in great condition, cut perfectly on my Glowforge. Will buy here again!

Sheet was bowed quite a bit and not flat at all. Both surfaces were somewhat rough requiring sanding for final product. Cutting with 10" 60 tooth carbide or regular Craftsman plywood blade both resulted in splinters separating from the core along the edges.

High quality 2 side mahogany plywood made without the use of formaldehyde glues. Quick ship in perfect condition. As a woodworking hobbyist I use it for the bottom of drawers and decorative boxes. Completely satisfied.