Questions and Answers for Weber Charcoal Fuel Holders (2-Pack)

A:  Hi! The dimensions for the Char-Baskets are Out Of Carton - 3.1"H x 3.6"W x 14.2"D and Individual Carton - 16"H x 5.2"W x 4.8"D. If you have any questions or want to know more, we're always here to help!

A:  Hi Pablo, thank you for your interest! We only recommend using this Rotisserie with a Weber grill, as we can not speak on the performance and measurements of non-Weber products. Thanks!

A:  I'm sure it can seams like the same diameter as the 22 kettle

A:  It us basically just a hole for your charcoal, so you could use it with almost any charcoal burning grill.

A:  Product size from Home Depot’s website under “speciations”, says it’s 5.2” deep, 16” high and 4.8” width 

A:  No, Mike

A:  Yes, can be used on all Weber charcoal grills

A:  Hello, this fits the 18 inch Weber charcoal grills, 22 inch Weber charcoal grills, and 26 inch Weber charcoal grills.

A:  Yes

A:  Should be able to, since they have openings on the bottom.

A:  Yes! You can place the baskets over the Touch-N-Go ignition system.

A:  These baskets are great for effectuating indirect heat so that you can slow cook meats over time to perfection!

A:  if your are putting wood chips in it will work great!

A:  Hello Paul, We would not recommend placing any charcoal in our gas grill, and to use the grill as it was designed. We apologize for any inconveniences. Thanks,

A:  I bought these to sit underneath the grill plate on one side with hickory or oak sitting on top of the wood and the pork butt sitting on top on the other side with as much space between as I could manage for smoking. Worked all right until I got an actual smoker. But in a pinch I would be do it again.

A:  Why would you need to? When you rotisserie any meat it is constantly turning. This is a way of in direct heat already. You could use these holders or not. Most of the time you sperate your coals to the sides any way. On a Weber the heat circulates, that's why Weber created there grill in a round dome shape. Keep your grill out of the wind, and you won't have any ashes flying around. Place a small bowl of water while cooking, helps to moisten your food. A lot of people that smoke food do this. Good luck grilling.

A:  Hello Paul, We would not recommend placing any charcoal in our gas grill, and to use the grill as it was designed. We apologize for any inconveniences. Thanks,

A:  I use mine all the time. Chickens, roasts, tenderloin, ribs, anything that takes some time to cook. Works great as is, no issues with ash.

A:  I personally would not use this method for cooking a chicken with the rotisserie simply because with that much heat directly under the chicken there would probably be a lot of juices dripping onto the charcoal and creating flames that would easily burn the bird. I would place a layer of charcoal on the charcoal grate and remove the cooking grate, adding more charcoal as needed. But, try your method and tweak as necessary. Won't know unless you try! The purpose of the charcoal holders is for indirect cooking, as in the smoking method.

A:  These are used with charcoal briquettes, And charcoal is the heat source. Ceramic briquettes still require gas. I don't believe this is the best choice for ceramic.

A:  I would think they would work with ceramic brickettes, but don’t know since I have never used a grill of this type

A:  Hi Frank! Our Charcoal Fuel holders have only been designed and tested for use with charcoal. We would not recommend using them with ceramic briquettes. Thanks!

A:  Hello Frank I would refer this question to Weber. I have only used ceramic briquettes in a gas grill.

A:  The fuel holder is not for brickettes they don't burn or put off any heat so they would degrease cooking time and space .

A:  Yes

A:  The long side is 14 1/8” long

A:  The basket measures just a fraction over 14 at it's longest point. My grill is 22.5 at top, so I can't really say if 2 will fit, but one should fit ok. (I use only 1 basket most of the time anyway)

A:  Hi Paul, out of the box, each Charcoal Fuel Holder measures 3.1"H X 3.6"W X 14.2"D. Thanks!

A:  mine are 14&1/8 by 5 inches. They fit nicely in the bottom of my 22 inch weber kettle. & work very well for indirect cooking.