Questions and Answers for Swan 32 in. x 60 in. x 59.6 in. 5-Piece Easy Up Adhesive Alcove Tub Surround in Bisque

A:  Yes, the TI-5 can be installed over existing tiles. Depending on the condition of the existing wall surface, additional silicone adhesive may be required to ensure contact between the substrate and the wall panel. Old ceramic tiles, if solidly adhered, do not need to be removed. All plastic tiles must be removed before installation. Any loose ceramic tiles must be removed or reattached. Old tiles and front edge ceramic tiles should be reset for appearance only. Any tile accessories must also be removed. Remove the bottom row of tile and cut a ventilation gap in the substrate. The surface must be dry, smooth and free of dust, soap scum or any other contaminates.

A:  Yes, this can be installed over existing tile.

A:  The 32 in. x 60 in. x 59.625 in. 5-piece Easy Up Adhesive Tub Wall in Bone, comes in 5 pieces.

A:  yes--I have an old tub-color was as close as I could get--worked great! use good glue and supports!

A:  The Swan 5-piece Easy Up Adhesive Tub Wall can be installed on any suitable wall surface, regardless of tub brand.

A:  Yes, the TI-5 tub wall kit can be used with any bathtub brand. It is perfect for use when remodeling with an existing tub or for installations with a new tub and wall system. Thank you for considering a Swan product for your bath remodel.

A:  Unfortunately, there is no good solution for repairing the soap dish on the existing panel. Swan does offer consumers the ability to purchase individual replacement panels for all of our wall kits. Since the side and back panels overlap the corner panels, you can remove the broken panel and replace it. Although this will require some work and possibly new dry wall behind the affected panel, this would be your best solution. Your local Home Depot store can call for pricing and can special order the required panel to fix your wall kit.

A:  It can be cut to fit length width and depth. Use shears to cut it a saw doesn't work.

A:  Yes it can. Use shears a saw doesn't work.

A:  The TI-5 should fit your dimensions with no trimming required. The overlapping panels allow for flexibility to fit tub areas 29" to 32"D and 53" to 60"W. This should be the perfect solution for your home! We appreciate you considering a Swan product.

A:  Yes, you can cut the TI-5 back panel to accommodate a window. This can easily be accomplished using a saber saw with a fine tooth carbide blade. We do manufacture a window trim kit, SSWTK, that can be used with this unit. You can purchase the window trim kit via special order in your local Home Depot store using Part No. TK03610.018. Thank you for your interest in a Swan product for your bath remodel!

A:  Yes it can and can be cut to fit. Use shears a saw doesn't work.

A:  Yes we have one above the tub also. Can be cut to fit. Use shears to cut it a saw will not work. Fit perfect after being cut.

A:  Sorry to report it does not. Surround is for walls only.

A:  The TI-5 tub wall kit does not include a liner or separate bathtub. The kit includes two side panels, a back panel, two corner panels and two apron strips. Swan does not offer a one piece bathtub and wall unit. We appreciate your interest in a Swan product.

A:  Yes we installed it over ceramic.

A:  Yes it can

A:  If you go to the Swan website and look for installation instructions for TI5, it has all the answers.

A:  The TI-5 tub wall does not have a lip on the edge of the panel to cover the old tile. Trim will be needed. We would suggest a plastic/PVC trim to cover the edge. Other information for installing on tile: Depending on the condition of the existing wall surface, additional silicone may be required to ensure contact between the tile and the wall panel. The tile, if solidly adhered, does not need to be removed. All plastic tiles must be removed. Must remove or reattach any loose ceramic tiles. Old tiles and front edge ceramic tiles should be reset for appearance only. Remove any tile accessories attached to the walls. The bottom row of tile must be removed and a ventilation gap, cut in the substrate. The surface must be dry smooth, and free of any dust, soap scum, or any other contaminates.

A:  It’s my understanding unit is a universal fit, therefore shower head and fixtures can be installed on either left or right hand. Make sure to insure measurement for plumbing (faucet) is correct you only get one chance to get it right.

A:  Thank you for considering the TI-5 for your bath remodeling project. Yes, you can install the shower head and faucet on either side wall. You or your installer can drill the holes according to your placement dimensions using a router, saber saw or hole saw. The holes should be drilled 1/2" larger than the diameter of the plumbing outlets. Installation instructions are located online in the "Info & Guides" section of the product page for additional information.