Questions and Answers for Masonite 36 in. x 84 in. No Panel Lincoln Park Primed Interior Sliding Barn Door Slab with Hardware Kit

A:  Thank you for your question, Jesus. The Masonite 36 in. x 84 in. No Panel Lincoln Park Primed Interior Sliding Barn Door Slab with Hardware Kit is not available in custom sizes. If you have any additional questions, please don’t hesitate to contact us by email at helpline@masonite.com. Sincerely, Masonite

A:  Hello Chico These door units can not be trimmed as this will void the warranty

A:  Hello Kathy, You will need to have two barn door kits and then you will need a track joiner kit as well for these to connect. 2 doors will not work on 1 track.

A:  Hello Patty these units do not come with a lock. These will have to be sourced at a hardware store like Home Depot

A:  Hello Paul the barn doors are sold as a kit and are not customizable.

A:  Hello Steve yes the handle can be placed on either side depending on your need

A:  Hello Jenn Please contact the installation team at your local Home Depot for assistance with pricing.

A:  Hello Julie no the barn doors are not setup to be bypass doors.

A:  Hello Bryan we recommend a water or oil based paint for interior door units

A:  Hello Bobb you can place the handle on the right or left side of the door depending on your needs. Position the handle on the panel. The suggested position is for the center of the handle to be 36” above the floor and 2-3/8” from the edge of the door. This can vary slightly to match other nearby hardware or to center the handle in the door stile. Using a pencil, mark the location for the mounting holes using the handle as a template. Drill a 1/8” diameter hole 1” deep at the 8 locations. Using a hand screwdriver, Attach the handle with the screw provided.