Questions and Answers for Graco Magnum 50 ft. x 1/4 in. Airless Hose

A:  Hi Chris, Yes, this is a standard 1/4 inch hose and should work on their sprayer. If you have any additional questions please feel free to give us a call at 844-241-9499. Thank you, Graco Support Team

A:  Hi Anthony, 50 ft of hose would be fine on most airless sprayers of ours. I'd recommend giving us a call at 844-241-9499 so we can find out which sprayer you have and confirm if it'd be alright. Thank you, Graco Support Team

A:  You have screw each end on, if that’s what your asking. It will mount to your sprayer an existing hose, and or the gun

A:  Yes

A:  Hello, Yes our airless hoses come ready to attach to the machine and gun. Thank You For Contacting Graco.

A:  Absolutely

A:  Thank you for your question on the Graco Magnum 50 ft. x ¼ in. Airless Hose. Unfortunately I don’t know the thread size and pitch of the unit you mentioned hose connections, as it isn’t a product made by Graco. If you contact Wagner and get us that information, we can tell you if it would work or not. If you have any further questions please reference 181295 and give us a call 844 241 9498 M - F 7:30am to 5:30pm CST Thank you, Graco Technical Service Group

A:  Those does become more flexible in warmer temperatures.

A:  As you unveil and use it the hose will get softer and more flexible. Air temp is a big factor for pliability

A:  No. It is what it is. Personally, I did not have any problems with its flexibility. You have paint under high pressure having to traverse a 50 foot length and that requires a lot pf pressure. Hence its stiffness.

A:  No it cannot be made more flexible. Not sure why you request it to be more flexible - I've used it repeatedly and it works great.

A:  I've been painting with airless hoses for over 40 years, and because of the pressure resistance they are ALL relatively inflexible, especially in colder weather ...

A:  This hose is rated for 3300 PSI and has 1/4" female NPT fittings. You would need to confirm with Ryobi what hose they require on this sprayer. Graco Technical Service

A:  I think you mean Ryobi RAP200G Airless Paint Sprayer ... the Graco is a standard airless hose with standard 1/4" fittings and will work just fine ...

A:  If it doesn’t fit you can return to HD for a full refund

A:  Airless hoses are universally 1/4" straight thread until you get to the very largest commercial models ...

A:  not directly without some kind of adapter, which I will be looking for myself soon.

A:  IF the hose is standard then yes you need an adapter to connect the 2 hoses. My unit is an older model so they may have changed it. Check with the HD paint dept. to make sure. Best Wishes.

A:  Yes, it will fit on the sprayers themselves and comes with an adaptor to extend the original hose for 50 ft. more.

A:  Yes. It even comes with a connection for that very purpose.

A:  Yes you can join them, mine came with the adapter needed.

A:  Between the pump and hose a 50 foot length takes about 1/2 gallon before it reaches the gun.

A:  About a half gallon to a gallon. You will lose about 10% of your product with by spraying.

A:  We sprayed 5 gallons of original oil based Kilz without any problems. Cleans up well.

A:  Dixie, The hose holds about a quart of material. Be sure sprayer you are using the hose on can spray hot solvents such as lacquer. Thank you, Graco Technical Service Group

A:  Only a few ounces ...