Questions and Answers for Graco Magnum 50 ft. x 1/4 in. Airless Hose

A:  Absolutely ... totally standard 1/4" airless threads

A:  yes

A:  I believe it should. I have a Titan from SWilliams and it's a workhorse

A:  Make sure the max pressure does not exceed the 3300 psi. Otherwise as long connections are correct on 330, it will work. Thank you, Graco Technical Service Group

A:  Sure ... 150 feet should be no problem ... if you get tails, just thin paint a little ...

A:  Yes, you can attach addition hoses together. You can go up to a max length of 100 feet. Thank you, Graco Technical Service Group

A:  I would not recommend it.

A:  You can put a max of two of these together. The X7 has a max hose length of 100' per the manufacture. That being said I have used a competitor equivalent with 125' before without any issues. Magnum X7 Specifications Model Number 262805 Recommended Usage* 125 gal/yr Maximum Tip Size .017 in Maximum Pressure 3000 psi Performance Rating .31 gal/min Maximum Hose Length 100 ft

A:  Yes you can but it will take more paint to get to the gun during setup. Most can be recovered, however, if you recover the paint during cleanup.

A:  No, the coupling comes with the sprayer, but they are available at Home Depot or if out of stock you can check any local hardware store

A:  Yes

A:  Harold, Yes, it would come with the couplings. Thank you, Graco Technical Service Group

A:  Yes it will mount up to your pump sprayer and the spray handle.

A:  Yes, a hose coupling comes with this hose. It allows you to connect 2 hoses together for even longer lengths.

A:  the hose can stand the pressure but it is basically a hyd. hose and it's very stiff.

A:  It can be , it will hold the pressure the 2 only problems are 1 its way to stiff, 2 finding fittings to attach to the ends, which will be the lesser of the two, this hose kinks real easy and if it does that under pressure it would probably brake, personally I wouldn't just because you can get a real good 50 foot rubber hose for less than 25 bucks.

A:  Yup, if flexibility and high air flow aren't factors ...

A:  No, this is for use with airless paint sprayers.

A:  No

A:  Sure ... same threads (1/4"), just make sure swivel is male thread one end and female the other

A:  Yes you can get the small Graco Straight Hose Swivel Connector Model # 244515 but I prefer the Whip Hose 3/16 in x 4 ft Model Number: 247338 which does the same thing and gives me extra length.

A:  yes

A:  Hello JoeP, Thank you for your question. Yes we offer a swivel for your application. Part number 224457 will fit between your spray gun and hose. Thank you for contacting Graco Technical Assistance.

A:  Yes

A:  no. rubber hose can't stand the pressure.

A:  Absolutely not!

A:  Hello, thanks for your inquiry. Airless sprayers use very high pressures to spray the materials. They need a very high pressure rated hose for this purpose. These hoses are stiff to handle that pressure. A normal rubber hose will not work and is not recommended at all. For further questions you can contact our Technical Assistance at 1-844-241-9499. Thank you for contacting Graco.

A:  We havent tried rubber because it may have greater adhesion of the spray material. I have rubber hoses that I use for air but not liquid. Concerned lacquer based products may be harsh and eat at rubber. The PEX type hoarded plastic seems less prone to clogging depending on spray product and cleans with water or lacquer thinner lo

A:  If it is used for the airless paint sprayer no, it has to hold at the minimum 3000lbs of pressure, don't even try it with the rubber hose, it wouldn't last 30 seconds.

A:  Hello Lacox, This Graco Magnum Airless Hose is rated for 3000 psi. If you have further questions please call Graco Technical Assistance 1-844-241-9499

A:  The hose for the sprayer is rated at 3000 psi, it was around $60.00

A:  3000PSI

A:  3000 psi