Questions and Answers for Glacier Bay 24 in. L x 3.1 in. ADA Compliant Grab Bar in Brushed Stainless Steel

A:  Thank you. The kit does not include the wall anchors since the screws should be installed in a stud. If this is going to be a stud-less installation, we recommend the WingIt stud-less installation kit Internet # 202552917 Model # RC-RESGBW35-2 Store SKU # 1005557118 Store SO SKU # 1000762707

A:  My guess would be only if you were going directly into a stud

A:  There is no "installation kit". Just purchase (6) anchor screws appropriate for the type of surface/wall you intend to attach grab bar to.

A:  There’s no kit. Installation is easy: use the included paper template as a guide, drill a few holes in the wall, screw the round grab bar mount in place, and slide the decorative caps over the mount.

A:  Thank you. You can purchase the WingIt kit at Home Depot. Internet #202552917 Model #RC-RESGBW35-2 Store SKU #1005557118 Store SO SKU #1000762707

A:  Hello Gale, Thank you for your recent inquiry with The Home Depot. We have a service call Pro referral and they will be delighted in assisting you in finding an installer. Pro referral contact information 855-723-2266. We appreciate your business and look forward to serving you in the future.

A:  Is about a 10 minute install even for novice. You can look it up on YouTube anniversary

A:  Thank you. This will not be enough support unless you install the WingIf Studless installation kit.

A:  For steel studs, you would need some kind of expanding anchor. I would definitely not recommend just using sheet metal screws to give you the strength you need.

A:  I'm not sure 'mobile home, steel studs' is a question but if the implied question is - how/where do I secure the bar --? My handyman cut a hole in my wall (plasterboard), put in another cross 2x4 and then secured to with wood screws). You have to remember that you may be putting you entire weight on the bar in order to get up. So it needs to be very secure. I ope that helped.

A:  Yes.  Be sure to anchor into structure. 

A:  Yes if have drill bit that can drill threw the stone! 

A:  Yes it can but I suggest heiring a professional because they would know what type of drill bit to use and how fast you can drill. If you are good at this stuff I suggest watching some y-tube videos and practicing on a couple scrap pieces. Good luck.

A:  Yes. After drilling tile with correct bit and using the proper wall anchor.

A:  Thank you. It can be installed on stone tiles, but you will need to have a drill bit specifically made do drill into stone. Also, if you can't screw into a stud, you will have to purchase the WingIts Studless installation kit. (SKU 147-567).

A:  It has to be mounted at an angle to attach at next stud.

A:  Thank you. You will need the WingIts compatible flange for stud-less installation; WingIts sold separately (SKU 147-567)