A: Hello, the GAF Liberty Peel and Stick roofing can be applied down to a clean plywood deck without underlayment. We ask for the plywood to be primed with an ASTM D41 Asphalt Primer before installation. Please call our technical team to discuss at 877-GAF-ROOF. Thank you for your question
by|Aug 28, 2023
Q:Can this be installed on an 8/12 pitch roof?
by|Aug 18, 2023
1 Answer
Answer This Question
A: Hello, the Liberty Cap Sheet product is ideal for primed low-slope roof areas of 1/2:12 to 3:12 pitch, such as sheds, porches, garages, carports and sunrooms. Thank you for your question.
by|Aug 21, 2023
Q:Is it possible to get a custom length of roll? I need 15 rolls at 38' long (I don't want to overlap)
by|Aug 10, 2023
1 Answer
Answer This Question
A: Thank you for your question. We do not have custom length rolls. The LIBERTY Cap Sheet covers 1 square per roll, excluding laps. For further questions, please give our technical team a call at 877-GAF-ROOF.
by|Aug 14, 2023
Q:Can this be installed over bitumen?
by|Aug 5, 2023
1 Answer
Answer This Question
A: The Liberty system can be applied over a variety of substrates. To go over your specific conditions, please call our product and technical team with at 877-GAF-ROOF (877-423-7663), Option 5, and they will be happy to go over your specific conditions and provide you with recommendations!
by|Aug 7, 2023
Q:So I need this cap sheet, plus the base sheet, then I replace the "messy solvent-based adhesive" with messy ASTM D41 solvent-based primer, that I have to go chase down since HD doesn't carry any, what's the benefit of the 3x-4x the cost and extra work??
by|Aug 5, 2023
1 Answer
Answer This Question
A: The Liberty SBS Self-Adhering Cap Sheet can be installed in either a 1-Ply or 2-Ply system. While the 1-Ply system uses the Cap Sheet adhered to a primed deck, The 2-Ply system consists of the Liberty Base/Ply Sheet and Cap Sheet. For additional information, please call our technical services team at 877-GAF-ROOF.
by|Aug 29, 2023
1 found this answer helpful
Q:Can this be installed on top of weather shield underlayment
by|Aug 5, 2023
1 Answer
Answer This Question
A: The Liberty Cap Sheet should be installed to a primed plywood deck or another approved substrate. Please contact Technical Support Service Team at 877-GAF-ROOF.
by|Aug 7, 2023
Q:Does any of your rolled roofing come in 75? or 100? rolls. Thanks
by|Aug 3, 2023
1 Answer
Answer This Question
A: Thank you for your question. The Liberty Self-Adhering Cap Sheet covers 100 square feet per roll.
by|Aug 5, 2023
Q:Our concrete foundation has rigid pink foam insulation attached to it. Can this product be attached to the foam to achieve the look of a concrete foundation or would this product react negatively when attached to the foam?
by|Jul 28, 2023
1 Answer
Answer This Question
A: Thank you for your question. We recommend putting either a 1-ply system consisting of the Liberty Cap Sheet adhered to a primed plywood deck or a 2-ply system which consists of the Liberty base sheet adhered to a primed deck and the cap sheet on top of the base sheet. For further questions on installation please call our technical support at 877-GAF-ROOF. Thank you.
by|Jul 28, 2023
Q:Will any of your products stick to rolled roofing that is already nailed to a flat roof?
Thanks
by|Jul 28, 2023
1 Answer
Answer This Question
A: Hello, We recommend installing the Liberty Cap on primed plywood deck. It is not recommended to install the Liberty Cap Sheet to an existing roof membrane. For additional information, please call our technical services team at 877-GAF-ROOF.
by|Jul 28, 2023
Q:What should I prime the plywood with?
by|Jul 26, 2023
1 Answer
Answer This Question
A: We recommend the GAF Matrix 307 Premium Asphalt Primer or a comparable ASTM D41- type primer. If you have any further question please contact the technical support services at 1-877-GAF-ROOF.