Questions and Answers for Everbilt 1 HP Submersible 3-Wire Motor 10 GPM Deep Well Potable Water Pump

A:  Dohshodo Thank you for your question. The leads from the motor are 14 gauge. The wire size that you will need from these leads to the service point will depend on the total run length of your system. 14 gauge wire is acceptable up to 353 feet. Regards, Everbilt Customer Service

A:  Mark Thank you for your question. This pump has a 1 1/4” discharge. You can reduce it down to 1” using the 11/4” by 1” barbed adapter that is sold in the accessory offering. The sku number is 1001096324. This will work with the black poly pipe sku number 1001306009. Please call our customer service department with any additional questions. Regards Everbilt Customer Service

A:  Andy, Thank you for your question. Yes, this pump is rated to be used with potable water. This pump is NSF approved for potable water. Best Regards, Everbilt Customer Service.

A:  Eric, thank you for the question. The discharge outlet on this pump is 1-1/4" NPT. Best regards Everbilt Customer Service.

A:  Roger, thank you for the question. The 1/2 HP pump in ideal conditions will produce a max pressure of 50 psi. Best regards Everbilt Customer Service.

A:  Eric Thank you for your question. You can not buy a replacement internal check valve, however you can use a standard 1 1/4" brass check valve in its' place. Regards, Everbilt Customer Service

A:  Sandy, Thank you for your question. Can you tell us more about your well? Do you know what the depth of your well is? Most likely, this pump will work in your application. We would like you to contact our Technical Service for further discussion about your application. Regards, Everbilt Customer Service

A:  Dave, thank you for the question, this pump can provide 10 GPM from 175 feet to 225 feet. If you have any other questions feel free to call our customer service team at 844-883-1872. Best regards Everbilt customer service.