Questions and Answers for Delta Windemere 8 in. Widespread 2-Handle Bathroom Faucet with Metal Drain Assembly in Stainless

A:  They are more of a copper colored. It's a beautiful accent to the faucet.

A:  Although they may look a little brassy in these pictures, they are defiantly copper colored highlights.

A:  I would say copper colored

A:  Copper

A:  Copper

A:  Hi, Mikodi! Thank you for your question. The metal highlights on the Delta B3596LF-OB faucet is a copper finish. Best Regards, Rosanna

A:  Thank you for your question, lindy! The model B3596LF-OB does include a matching metal pop-up drain assembly to complete the look. Best regards, Edward

A:  No it doesn’t. We have been very happy with it.

A:  It has a drain that works with the plunger on the back of the faucet. You can see it on the back in the picture.

A:  Yes, it has a color matched pop-up drain that comes with the handle set.

A:  Yes. Very pleased with the faucets for the price.

A:  Yes you have to contact delta the part number should be in the installation booklet that came with the faucet if you still have it

A:  Dear Redhead, Thank you for your question. We would be more than happy to assist you with any issues you are having with your Delta faucet. Please call the toll-free Delta Help Line at 1-800-345-3358 between the hours of 7:00 AM to 7:00 PM Monday ~ Friday as well as 9:00 AM to 6:00 PM Saturday EST. You can also contact us via email at customerservice@deltafaucet.com. Best regards, Tanya

A:  Just looked through the installation instructions and a replacement part number is RP26533 described as Metal Pop-Up Assembly Less Lift Rod. Delta also offers free replacement as long as you still own your home and have the receipt. Contact number for the US is 1-800-345-3358. Good luck.

A:  No it can’t be installed on a 4 inch Spead

A:  According to Delta's technical specs it can be installed on 6 to 16 inch centers. I installed it on 8 inch centers.

A:  No, and it is very cheaply made.

A:  Thank you for your question, Susie. This faucet will work on a 6" to 16" installation. For 4" centers, we recommend using the centerset model B2596LF. Best regards, Jon

A:  Thank you for your question, Kathy. This faucet includes a pop-up assembly with overflow holes. Best regards, Jon

A:  Dear CatsinQ, Thank you for your question. If a stopper does not lift straight out, it is being held in by the horizontal rod. Behind the drain pipe under the sink is a horizontal rod connected to the lift rod via the strap. The horizontal rod is held in place by a nut. Remove the nut and pull the horizontal rod straight away from the pipe about an inch. The stopper should now come free of the drain. https://media.deltafaucet.com/MandI/86605%20Rev%20B.pdf Best regards, Tanya

A:  You have to remove the lift lever under the sink at the back of the trap. The lever goes through a hole at the bottom of the pop up.

A:  See the attached photos with measurements. Not sure if I addressed your specific question but perhaps this will help. The faucets are very nice and durable. We've had them installed now for about 5 or 6 years and they are like new still. No tarnish or blemish on the finish. Secure shut off. No drips, leaks, - no problems.

A:  Hi Lynnie59, Thank you for your question! We recommend having 2 1/2" or more between the center of the installation hole and the backsplash. This faucet should fit great as long as the holes are 6-16" on center and deck is 1 1/8" thick or less. Best regards, Jon

A:  Thank you for your question, Bud. The drain assembly can only be used in a sink with an overflow. However, you can use a push pop-up drain assembly such as the 72172-SS with this faucet. You may install the lift rod as a decorative piece. Best regards, Jon

A:  Dear Dori, Thank you for your question. The spout assembly of the Delta Windemere Lavatory B3596LF faucet has a height of 6 13/16" (173 mm). https://media.deltafaucet.com/SpecSheet/DSP-L-B3596LF%20Rev%20C.pdf Best regards, Tanya

A:  Arc from counter to highest point is about 7 inches high.

A:  Hi, Frustrated. Thank you for your question. Unfortunately, we do have a pop up drain assembly that is sold separately that is made without overflow holes. The pop up drain assembly is 72172. Here is a link to the assembly: http://www.homedepot.com/p/Delta-Push-Pop-Up-Drain-Assembly-in-Chrome-with-Less-Overflow-Holes-72172/204154079 Best Regards, Rosanna