Q:Will DPT-12D131GFH dewalt nails work with this gun?
by|Oct 13, 2022
1 Answer
Answer This Question
A: The compatible nails specifications are: Nail Lengths 2"– 3-1/2" (50 mm – 90 mm), Shank Diameters .113"–.131" (2.8 mm – 3.3 mm), and Nail Stick Angles 30˚– 34˚
by|Jun 15, 2023
1 found this answer helpful
Q:Does this nailer require C02 cartridges to operate?
by|Oct 12, 2022
1 Answer
Answer This Question
A: This nailer does not require a C02 Cartridge.
by|Oct 12, 2022
Q:Can you use siding nails with this model? And if so what mail is recommended? Thank you
by|Sep 29, 2022
1 Answer
Answer This Question
A: The DCN690 cordless framing nailer has been designed for driving nails into wooden workpieces. It is not recommended to be used on siding. Drives 30-34 degree paper tape nails from 2 in. to 3-1/2 in. long.
by|Sep 29, 2022
Q:How good is the warranty
by|Feb 2, 2022
2 Answers
Answer This Question
A: Hello Pressman
Thank you for your contact. We apologize for any trouble or inconvenience in finding information. The following website is updated with the most current information on DEWALT product warranties. You can also reach out to DEWALT customer service directly if you have further questions.
https://www.dewalt.com/legal/warranty/general-warranty-information
Best Regards
Sherri C
DEWALT
by|Feb 3, 2022
A: I returned my gun; it under performed. I had it for a month and ran a box of nails thru it. (It handled short nails great; sucked on the framing nails.) However, return, and warranty in this case, was awesome. Young woman on phone was courteous, and processed return cheerfully. Now all I need do is drop the gun off at my Home Depot store.
by|Mar 22, 2022
Q:Can you use this nailer for fastening 3.5-inch 16d nails through a joist hanger?
by|Jan 20, 2021
1 Answer
Answer This Question
A: We recommend using the DCN693M1 20-Volt MAX XR Metal Connector Nailer for installation of joist hangers.
by|Feb 5, 2021
Q:Will 1-1/2 nails work in this gun event though the specs say 2"?
by|Sep 1, 2020
2 Answers
Answer This Question
A: No.
by|May 20, 2022
A: I don’t see any paper collated 28 to 30 degree framing nails? In 1.5 I will look again today I would think if they load . They’d fire . And this model has horrid single shot performance issues I’ve tried 4 of this model,in single shot twill misfire and jam more than set a nail . Very disruptive. You cannot depend on this unit for real work. Or lazy Saturday’s either. I own 100 dewalt Flex And 20V max tools ...I am also from Townsend MD mite as well call me Sir DeWalt he he
by|Sep 2, 2020
Q:About how many nails can this shoot before battery dies
by|Aug 29, 2020
1 Answer
Answer This Question
A: The DCN692M1 can drive up to 700 nails per charge using the DCB204, four amp hour battery.
by|Apr 26, 2024
2 found this answer helpful
Q:how much for the tool only you cant get a price if you dont add it to your cart and you cant add to cart because its out of stock
by|Jun 20, 2020
1 Answer
Answer This Question
A: Around 319 tool only . And you will not be happy with this nailer unfortunately it seems the framing nailers take a real beating I own this model who has more bent nails sticking in the wood then seeded nails very disappointing I went back to my Hitachi A85 real nailer. Finish nailer in the staplers work great the framing nailer if you do not get the nails just right is a fail I've had good luck with the three and a half inch paslode with the black on the nail not the red or the purple the nails make a difference it has to do with the nail diameter like 131000 is not a happy camper
by|Jun 23, 2020
Q:What is the maximum length the 18 ga pin nailer uses.
by|May 30, 2020
1 Answer
Answer This Question
A: The DCN680B will use sizes from 5/8 TO 2-1/8 IN.
by|Aug 6, 2020
Q:What model charger does this kit come with? Will it charge any comparable "ah" battery?
by|Mar 15, 2020
1 Answer
Answer This Question
A: This kit comes with the DEWALT model # DCB115 charger.