Questions and Answers for BLACK BULL Blast Media 80-Grit Abrasive Garnet Sand

A:  garnet may be too hard for aluminum. It will remove the paint but may do damage to the aluminum if your sand blaster has too much pressure. I would recommend professional soda or dry ice blasting.

A:  You can use the SBGARN.

A:  The BlackBull Grit is 80 grit, which is what is recommended with the use of the various Black Bull products.

A:  Depends upon the sand. 80 grit is the size of the particles. In most sand the particles vary in size.

A:  yes. Note that the color of garnet is rusty red/brown

A:  The product works best with jobs for Paint Removal, Cleaning, Etching & Surface Preparation General Abrasive Cleaner Suitable . For A Multitude Of Applications Use On All Metals, Brick, Concrete & Masonry.

A:  Yes, the grit abrasive sand can be used to fill joint between pavers.

A:  No, while you might be able to pull this in through your detergent/cleaner intake hose line, possibly, it would destroy your pump internals. This for sandblasters, not pressure washers.

A:  No. used in and air powered sand blaster

A:  No, this product is for use in a sand blaster.

A:  This media is intended to be used with a sandblaster or abrasive blaster. I would not recommend using this with a power washer.

A:  yes you can if you get a hydro sand blasting attachment but not sure about the grit !! https://www.homedepot.com/p/Simpson-Wet-Abrasive-Sandblaster-Kit-for-Gas-Pressure-Washers-SAN0002/100663338?MERCH=REC-_-PIPHorizontal1_rr-_-203494096-_-100663338-_-N

A:  The garnet sand cleans and finishes many surfaces. It removes paint, rust, graffiti, corrosion and scale. Thank you.

A:  If clearances are important then you are better off with glass beads. This works great for iron and aluminum housings but it is too abrasive where tolerances are important

A:  It came in a metal container and weighed approximately 50 pounds.

A:  The product weighs 22.8 pounds.

A:  80 Grit sand/media is an extra fine sand/media. That is what is required to use in the blasting pots and cabinets. Thank you.

A:  As stated it is equivalent to 80grit sand paper. I would compare it to fine table salt.

A:  Black, just like it says on the can.

A:  Light brown

A:  I SUPPOSE BUT I DON'T KNOW IF IT WILL INTEGRATE WITH THE SOIL PROPERLY. I BLASTED OUTSIDE AND CAN'T SEE THE MEDIA NOW.

A:  Yes, this product is sand.

A:  We do have the material safety data sheet available if you contact customer service at 866-568-6657. We can get this to you. Thank you.