#1 Home Improvement Retailer

Questions and Answers for BLACK BULL Blast Media 80-Grit Abrasive Garnet Sand

Internet #203494096

Model #SBGARN

  • For use with blasting cabinets and abrasive blasters
  • General use abrasive for rust, paint, corrosion, scale
  • 53 lbs. of abrasive garnet sand

Questions & Answers

19Questions
caret
Q:Can you use it to sand blast the exterior of paint on a y
by|Mar 16, 2018
3 Answers
Answer This Question

A:  Please contact our customer service by emailing info@buffalotools.com to complete the inquiry.

by|May 5, 2023

    A:  Yes, the garnet media could be used to blast the exterior of a car, but for that task a more course and less expensive media might be preferable. I consider this media better suited for use in a closed system, such as a blast cabinet. The 80 grit Garnet is excellent for cleaning small parts in preparation for painting or plating. It is course enough to clean away rust or paint quickly, but yet leaves a relatively smooth surface.

    by|May 5, 2023

      A:  I use the 80 grit media to blast aluminum to prepare it for painting. The surface looks great after I'm done and the painted surface looks perfect. I flows great through my sand blaster and last a good long time.

      by|May 5, 2023
        caret
        Q:Other products state reuseable but this one doesn't specify one way or the other.
        by|Oct 29, 2017
        2 Answers
        Answer This Question

        A:  If you mean re-useable in regard to how many times you can use the same media to grit blast..the answer is yes. I use mine in an 80 psi table top cabinet made by Black Bull. I do small items like model train cars, tanks etc. You might have to replenish the supply now and then due to loss but it does not have to be dumped and replenished every time you use it. I use about 10 pounds each time and I get several uses out of it.

        by|May 5, 2023

          A:  Yes, you can re-use it. If it gets on the floor it can be very slippery to walk on . So be careful.

          by|May 5, 2023
            caret
            Q:Wanted to use this for lapping compound when mixed with kerosene on a dead flat surface, instead of silicone carbide.
            by|Sep 6, 2017
            2 Answers
            Answer This Question

            A:  It would be worth a shot.

            by|May 5, 2023

            A:  Please state your inquiry.

            by|May 4, 2023
              caret
              Q:using a 150 lb capacity blaster and 100 psi. how long would it take to descale steel plates 4foot by 8 foot. parts are painted with medium rust?
              by|Feb 16, 2017
              2 Answers
              Answer This Question

              A:  Depends on what you mean by "medium rust" and how tough and thick is the paint . In my experience the best way to proceed is to go over the panel with 80 grit sander to knock off the scales, then sand blast it. If there are no rust pits the whole process will take about 1or 2 hr assuming the paint is not too thick.

              by|May 4, 2023
                1 found this answer helpful

                A:  I have not blasted anything that big but,,,,,,I run my cabinet at 80 psi and can remove mill scale on a 1' x 2' piece of steel in about 3 minutes.

                by|May 4, 2023
                caret
                Q:Garnet media is supposedly a very low dust media. Why so many negative reports of this product being excessively dusty? Is it a mixture of garnet and some other material?
                by|Feb 8, 2017
                2 Answers
                Answer This Question

                A:  This is only garnet.

                by|May 4, 2023

                  A:  It worked well at removing light rust off of steel and was not dusty.

                  by|May 5, 2023
                  caret
                  Q:do they make this product in 100grit
                  by|Nov 11, 2016
                  1 Answer
                  Answer This Question

                  A:  This product does not come in 100 grit.

                  by|May 4, 2023
                    caret
                    Q:This says its 800 ounces,so do the math that should be 50 lbs?
                    by|Oct 3, 2016
                    3 Answers
                    Answer This Question

                    A:  No doubt 50 or more as it is VERy heavy.

                    by|May 4, 2023

                    A:  yes it is heavy. 50lbs sounds right

                    by|May 4, 2023

                      A:  53 lbs

                      by|May 4, 2023
                        1 found this answer helpful
                        caret
                        Q:Your advertisement doesn't mention the amount in the can?????????????? Tom
                        by|Aug 27, 2016
                        2 Answers
                        Answer This Question

                        A:  About 14" in diameter x 18" in height. There are also 2 bags that hold the media inside the mini-barrel. One is plastic (like zip-lock material) to keep out moisture and another very strong mesh like bag outside the plastic. Amount of material is 50 lbs.

                        by|May 4, 2023

                          A:  It contains about 53lbs of media.

                          by|May 4, 2023
                            1 found this answer helpful