Questions and Answers for BEHR PREMIUM 1 gal. #ST-533 Cedar Naturaltone Semi-Transparent Waterproofing Exterior Wood Stain and Sealer

A:  Hi Robinvt, thank you for your question. The Semi-Transparent Stain cannot be color matched, but I recommend picking up a brochure with the color swatches to select the closest one to your siding. Have a great day! -Giovanna

A:  Hi Niya, thank you for your question. Proper surface preparation is important for a lasting finish. Depending on your applicator preferences and project size, the Premium Solid Color Wood Stain can be applied using a roller, nylon/polyester brush, pad applicator, or airless sprayer. Have a great day! - Randy

A:  Hi Danno, thank you for your question. The Premium Solid Wood Stain is a breathable coating when dry. Have a great day! - Randy

A:  Hi Tony, thank you for your question. As it turns out, the Premium Semi-Transparent Stain is recommended only over bare surfaces or previous water-based stains. Keep in mind that applying it over a previous stain may result in an unknown color mix, so removing the previous coating before staining is best. Let me know if you have any further questions. - Randy

A:  Hi Phil, thank you for your question. The Semi-Transparent Exterior Wood Stain can be applied to dry pressure-treated wood. Have a great day! - Randy

A:  Hi Dulce, thank you for your question. It sounds like you'd like to know whether you can coat over our Solid Color Waterproofing Stain & Sealer without priming the stain first. To best assist you, please reach out to us directly so we can learn more about your project and provide more information. We look forward to hearing from you! -Lina

A:  Hi Lisa, thanks for the question. Glad to hear that you love the stain on your new deck. As it turns our, it isn't recommended to be used on bamboo fencing. Have a great day! -Ronald

A:  Hi Jordy, thank you for your question. It sounds like you'd like to recoat your Solid Color Waterproofing Stain & Sealer with the same product in a different color. Yes, that's perfectly fine, so long as the surface is cleaned and allowed to dry before staining. Have a great day! -Lina

A:  Hi Donna, thank you for your question. As it turns out, the Premium Solid Color Wood Stain isn't recommended on metal surfaces. Instead, we recommend using our Direct-To-Metal Paint. Have a great day! - Randy

A:  Hi Bill, thank you for your question. We recommend allowing 24-48 hours for the wood to thoroughly dry before applying the Premium Semi-Transparent Wood Stain. Low temperatures and high humidity can extend the dry time. Have a great day! - Randy