Questions and Answers for All-Pro 110° Outdoor White Motion Activated Sensor Security Flood Light

A:  Please use the below link to access MS34W instruction sheet. https://www.cooperlighting.com/api/assets/v1/file/Signify/content/221523274c6c41bfb62aad4000640ba3/all-pro-ms34-w-825-0987-ins Once motion has stopped, the lights will turn off after a preselected time delay. Your motion activated floodlight may also be used as a standard floodlight.

A:  Yes these only come on when motion is detected. I believe they are suppose to come on if you flip the switch very quickly; however this doesn't always work.

A:  Yes. Motion Sensor 

A:  yes they come on when there is motion at night kk

A:  It has the capacity to handle 2 150W regular incandescent bulbs so you could certainly use bulbs of lesser wattage such as halogen or LEDs. The switching is an actual relay - real switch contacts driven by the electronics - so no weirdness with LEDs.

A:  No, 2 no's 150Watts required.

A:  Yes it is

A:  Yes. You can adjust the time of light stay "ON" from 5 seconds to 12 minutes using the time adjustment control dial.

A:  Yes, up to 12 minutes

A:  You can use anything that fits which (will depending on the socket aim) up to 150W per bulb and of course weather resistant. Switching is via a relay so no weirdness with LEDs like with dimmers.

A:  You have to use only PAR30 lamps in this fixture.

A:  Yes

A:  No it is not.

A:  No

A:  no

A:  No it is not

A:  To answer what I think your asking, will the cri flood lamp screw into the socket base. Yes, I used them with mine.

A:  You can use PAR 150W lamp ( 2 quantity) with this fixture .

A:  The only compatible bulb type is CFL, Halogen.

A:  i see no reason why it couldn't.

A:  No, it is not recommended to be mounted on a ceiling.