Oil-Rubbed Bronze Handrail Bracket

A:  Though the Everbilt Oil-Rubbed Bronze Handrail Bracket may look black in the image, it is oil-rubbed bronze. Our oil-rubbed bronze finish is a darker oil-rubbed bronze finish. Please see our updated oil-rubbed bronze finish here: https://www.homedepot.com/p/Everbilt-Oil-Rubbed-Bronze-Handrail-Bracket-20890/319727317.

A:  The Everbilt Oil Rubbed Bronze Handrail Bracket will work with a 1-3/4 round rail.

A:  Don’t see an issue. My rail is flat on the bottom so it is easy to attach. However don’t see how a round rail would have an issue.  

A:  Kind of. Not the greatest answer. Let me explain. The bracket that screws to the rail is 1/2” wide with the two screw holes running along the rail length. So, the two screws that attach the bracket to the rail can be installed, with the bracket sitting tangentially on the rail. Although secured sufficiently, there will be a gap at both edges of the bracket. That gap could lessen the stability of the rail to the bracket, if the rail were to be twisted about it’s circumference. To insure a proper fit, the rail could be shaved/planed to provide a flat surface for mounting the bracket. Example: draw a circle of 1 3/4” diameter, then draw a 1/2” long line tangent to the circle, with the center of the line just touching the circle. Note the gap between the line and circle at each end of the line. That is the gap mentioned above. 

A:  The bottom piece is made to lie on the wood and screw two screws into the railing. I believe that it will be fine on a round railing. 

A:  For the Everbilt Stainless Steel Handrail Bracket, the distance from the wall to the centerline of the handrail is 2.48".