Customer Reviews for Zamma Cherry 5/16 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl Multi-Purpose Reducer Molding

Just what I needed.

Served it's purpose well. Color match was terrific.

it did not lock into the groove very well and ended up having to put some screw through it to hold it in place

I From the purchase @ Home Depot,the installation by my contractor and the final results every thing is perfect. My wife and I can't be any happier with our choice and the results. We are pleased to show it off to our friends,neighbors and family. Thank you for the great product you have produced.

Looks.good, matches flooring exactly. As with anything take your time instaiing.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Looks very nice went down nicely

Works very well.

Rating provided by a verified purchaser

The flooring reducer is the finishing touch for the new floor. It has only been down a short time, but appears to be durable. The difference in height between the new and adjoining floors was a bit more than the reducer track could accommodate, so I just nailed this molding down with no problems. Definitely recommend this product.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Easy to cut and size and matches perfectly. Works great for transitions that are non-carpeted. For a transition to carpet, the tracks on the molding side need to be deeper in order to reach the bracket when going over carpet. I've had to super glue a piece of wood under the metal track to make up for the difference in height. Would also be nice to get more screws. Only 4 were provided, so if you break the single piece up for multiple transitions, you have minimal screws per section.

The floor looks absolutely beautiful n is easy to clean with a vinegar n water mixture. Everyone who has seen it loves it. It puts a smile on my face every time I walk in the room bc it gives my kitchen such an elegant finished look. could not b happier.

Matched the flooring we installed perfectly. Bridges the gap between Sedona flooring and carpet nicely.

Very brittle product, i recommend cutting by hand as it blows apart easy

Worked well for what we wanted & matched cherry flooring very well.

A great product. Easy to work with, and it looks great.

Got the job done

This stuff was just what the doctor ordered. Easy to fit, cut, and apply. Good directions and a perfect color match. I thought they were over-priced but then what isn't these days.

The directions sound so very simple if you have a perfect situation. We had to go back to the store to try and get some advice on how to install this piece. It was another customer in the store that overheard our dilemma and offered the correct solution as he himself had run into the same difficult installation issue that we had. Thanks to that customer!

Bought this product to transition from carpet to vinyl plank but couldnt get it to work. Track/snap needs to be made deeper to transition form carpet to hard floor. Disappointed.

The actual molding works very well and looks good. The only thing I would change is the mounting channel. it has scored circles to be removed to run a screw or anchor through for attaching the channel to the floor. If you try to remove the circles with anything but a drill (and you will try), you'll bend the channel and end up with an irregular hole for your screw/anchor. Also, the holes could be a little bigger to accommodate sturdier anchors, few of which are small enough for the holes anyway.

I love the way it looks to complete the job. It matches perfectly with my flooring.

The transition strip matched the flooring perfect, easy to install. Looks great!

Installed on a concrete slab floor. Rented a 1/2 hammer drill and used #6 X 1" screws and plastic inserts to screw down the track. 5/16" Drill. Very easy. Put a thin coat of rtv under the lip to stop dirt from accumulating underneath. once the track was down, installed the T moulding by lightly tapping with a white rubber mallet. Very easy to install, very easy to cut, used large tin shears, and very professional looking product. Had to use trigonometry to cut a 2 pieces that met with a 135 degree angle. Very good match on the Autumn oak vinyl plank floor. Great job Home Depot, keep up the good work. Matched Allure Autumn Oak Vinyl Plank floor to 3/8 Ceramic Tile and thin Linoleum using this product.

Looks very nice, easy to install and seems to be quality material

I didn't give this piece more stars because the lip needs to come in greater sizes.. will not work when going from tile to the planks...I was able to use with carpet

As advertised, works as expected. Would like longer options in length.