Customer Reviews for Milwaukee 1000V Insulated Screwdriver Set with Case with 12-24 AWG Adjustable Compact Wire Stripper and Cutter (11-Piece)

The typical stripper with different sizes going down from the top is hit or miss depending on wire but with this lil guy you really feel control since it's small and you're closer to the wire. Size adjusts with a simple spin of the dial and it can do 10-24 awg. Only issue is it appears rust is forming after minimal use. I took photos showing it on the same spot on both sides. Came well lubricated so I hope it's just the black paint wearing off. It spins freely if that matters. See photo

Excellent tools. Very well made and packaged

The Milwaukee 10 piece 1000-Volt Insulated Screwdriver Set and Case is a must have if you do any electrical work. The screwdrivers are rated up to 1000 volts and have two layers of insulation to protect you. Milwaukee coated the two layers in different colors. The outer layer is their trademark red and underneath is a yellow layer. If there is any damage to the insulation you will easily spot the problem when yellow is showing on the tool. This set comes with a quality case which has a foam insert with molded cut outs for each screwdriver. The case is made of a durable material with a rugged zipper and features nice embroidery for the logo and the kit part number. Additional features include lanyard holes on each screwdriver, flame resistant coating, impact resistance, a slim drive shaft and a limited lifetime warranty. The insulation rating is certified under IEC 60900:2012, ASTM F1505-10 and NFPA 70E. I found the tips to be well machined and they fit into fasteners with no slipping. I particularly like the ECX tip for fasteners found on outlets and switches. The screwdrivers include the following tip styles: #1 Phillips – 3” Shaft #2 Phillips – 4” Shaft #3 Phillips – 6” Shaft 1/4” Slotted – 6” Shaft 5/16” Slotted – 7” Shaft 3/8” Slotted – 8” Shaft #1 Square – 3” Shaft #2 Square – 4” Shaft #3 Square – 6” Shaft #1 ECX – 4” Shaft

Nice complete set of insulated screwdrivers that includes a nice foam storage set. Has all the standards certifications you'd expect for insulated tools of this quality to give you peace of mind. ASTM F1505-10; Standard Specification for Insulated and Insulated Hand Tools, and IEC 60900-2012: Live Working Hand Tools for use up to 100V and 1500 V DC., NFPA 70E This is a nice set to keep in your truck or in the maintenance room of a large facility. If you're just using this set for yourself yoou can keep some of the more comonly used ones in your toolbelt. There are clear markings on the back of the handle that make it easy to tell which driver you're reaching for. Kit includes the soft zippered case, ECX #1 bit which is great for those slotted/phillips screws on most electrical screw terminals on outlets and switches, Phillips #1, #2 and #3, Slotted 1/4", 5/16" and 3/8" as well as Square #1, #2 and #3. Insulated screwdrivers are basically just regular screwdrivers with an electrically insulated covering over not only the handle bt also the shaft that helps protect you from getting shocked while working on live devices. You still want to use your standard protective gear on top of that. The insulation is in two layers. The red outer layer and the yellow inner layer. If the insulation ever gets damaged it will be easier to spot because you'll see yellow (or bare metal) where you normally should see red. Even though there are two layers of insulation the shaft doesn't feel abnormally thick and I found it very easy to use these screwdrivers.

Milwaukee does it again. The 10 piece 1000V insulated screwdriver set is a thing of quality and beauty. The screwdrivers come in a very handy foam fit storage case that zips up, which helps you stay organized and protects the drivers. The set contains three different sizes Phillips, Slotted and Square screwdrivers and one ECX Anti-Strip bit. All have very comfortable handles that give the user plenty of torch, even for tough jobs. Perfect!

Milwaukee products are designed and manufactured for professionals and DIYers. This ten piece screwdriver set is tested and certified to insulated standards. They are constructed with a dual layer of insulation, fire resistant, and impact resistant. This set features three different sized Phillips head, three slotted, and three different square heads. Each driver has a convenient lanyard hole. Slim Drive shafts that allow easy access to recessed screws. Comes with a easy to store foam fit storage case.

Absolutely love these little cutters! They're very small and compact convenient and work very well!

I bought this item to splice new low voltage wires to old ones. The Milwaukee 12-24 AWG did the trick. It cut the wires with ease. Great little tool to do the job.

They are not Klein quality but, for the price they are a good deal.

Very poor quality. Not Milwaukees normal.

This guy is a good complete set. The case is great for storage.

This assortment of screwdriver's were just what I needed in my tool belt. The 10 sizes are just about all I will ever need. The sizes stamped on the top of the handle are a very big plus. So far they have preformed as expected of any Milwaukee tool.

They work for what we do at work however I feel like they could be a couple shorter ones.

Gave it as a gift to my son who is an electrician. He seemed quite pleased.

Milwaukee has great tools but this is one of their best. What great set of insulated screwdrivers and the case is topnotch! I love it! Expensive but 100 percent worth it!

Very Good piece my dad love it! D

Nice assortment of insulated screwdrivers. No more black tape around the shafts. :-)

No issues, works fine.

You get what you pay for, do yourself a favor and buy Milwaukee or Klein.

Nice high quality driver set, good grips, tips seat right and don't strip out screws.