Customer Reviews for Fasade Vinyl Peel and Stick Cracked Copper Outlet Cover (2-Pack)

I believe the intent of the product is an easy cover to make your outlet cover blend in. Which they would earn a 5~Star. The part where you bend the "Stiff" material over to cover the sides is a 50-50 proposition. Because the material is a bit thick I needed to add a touch of glue to hold the edges down.

The final product looks pretty good, but you must take your time and follow the directions and use a sharp exacto knife or razor. Leave a little more on the sides than the directions say to make sure the wrap folds around the back nicely. My biggest complaint is that the product doesn't adhere well to the back side of the outlet cover. Even after folding tightly and pressing for several minutes the product doesn't want to stick to the back properly. I think Fasade should offer covers that match panels instead of this product. All in all it matches the decorative panels and looks pretty good. We'll see how long it holds up.

This was the perfect finish to our project. I was afraid it would look like cheap contact paper, but that was far from true.

We used Fasade Vinyl in our kitchen the pattern matches our tile perfectly

I am an avid Upcycling Crafter; I make awesome stuff out of other people's junk. So when I say this stuff is an epic failure, know... This stuff is 100% WORTHLESS. It didn't adhere to any of the backs of our typical, plastic, Cover Plates no matter how long (>1/2") or short (1/4") we 'over cut' it. Funny that I had cleaned each cover plate w/Dawn dishwashing soap and then with white vinegar to ensure all were free of any oils, dirt, etc. before attempting to cover...as my husband insisted it was totally unnecessary and I was wasting time. I set them to 'dry out' for 15 mins, and NOT a single sticker stuck to the back of the cover plate once folded over. Broke out the ModPodge, Locktite Super Glue, Gorilla and a few credit cards. And with both of us pressing firmly down on the credit cards over large area of sticker for a good 1.5mins once glue was applied, still EVERY single sticker cover popped off backside of every cover plate after less than 1 min., no matter which additional adhesive we used. Wasted 4 sheets of this @ $$38 and ended up throwing it all in the trash. I am writing the company directly next. RIDICULOUS, PATHETIC, JUNK!

Rigid nature of product does not allow easy folding of vinyl to secure it to the back of plate. It also causes a crease and or wrinkles to form in screw hole. Over all product does as advertised. Other than the items mentioned the product looks great.

I have used this product before and have been very satisfied with it. Service from Home Depot was good as always.

The vinyl did not stick to the switch plate. I tried to use sand paper to roughen the surface for the second try. It did help some but not around the edges of the switch plate.

Light weight, looks great. Make sure your square footage is correct, maybe order one or two more pieces of backsplash to cover for mistakes.

Beatiful easy solution to match interior decor. The only disappoint was product adhesive needs to be a bit stronger to get edges to stick better. But I would diffinately reorder if needed.

The material is very high quality and matches beautifully. I cleaned the outlet covers well, and applied as directed. A few hours later, the vinyl was coming loose and peeling off.

The adhesive backing is not sticky enough, but can be compensated for by overlapping at least a half an inch over the back. Then taping overage down.

I guess it is better than having a white outlet cover, but the coverage is not good and it does not stick good. I am not very pleased with it.

Easy to fix mistakes with this product inexpensive product that works well

really easy to apply, cut with scissors and glued with liquid nails, looks classy and everyone thinks it looks great.

Looked at several home stores and nothing mated or complimented the Bermuda façade. This was easy to apply and looks great!

Easy to use. Application was simple. It looks beautiful on the matching backsplash.

color match and ease of use are the only positives , the term stick is a totol misreppresentation . Material wants to bubble up and peel off from behind before coverplates can be installed .

The product itself does have quality, however, the color does not match. Purchased the same color panel but the cover is significantly off.

The peel and stick outlet cover matches beautifully with the backsplash, and I consider it a decent price. I actually ordered more than I needed; one piece could be used for two outlets. The only problem is that it does not stick very well, so I will hold on to the extra ones in case I have to reapply. The look is beautifully, and easy to apply, but every so often, I have to press on a corner or side to stick the cover back down.

I tried attempted to attach this product to the outlet covers. It stuck to the front, but I couldn't get it to adhere to the back of the outlets, even with E6000 glue. I ended up saving my time and frustration and bought some really pretty metal outlets with a touch of the copper in them. It saved me a ton of time and I don't have to worry about accidently scratching the surface of the covers. I haven't regretted buying the metal outlet covers at all.

Will not stay attached to outlet cover. I even put super glue on it and it still did not stay on outlets.

The product was easy to install. It should have been carried in the store instead of having to be ordered on line and then waiting a week or more to finish my project.

After calling the co rep I was told that I could use tape to hole it on, (hello it is self adhesive) that offer was after I cut it to fit so the tape option was not useful. Not even an offer to send me another piece. I would not advise anyone to purchase this product

As others have said, the adhesive is not of a good quality. Problem is that if you have used the tiles, you really do not have a choice for outlet covers. I taped them on the back. Top also bubbles, but a small slice w/ an exacto knife fixed that

The product doesn't stick to the cover. Had to tape it to the back to get it to stay on. It also bubbles...not thrilled!

came quicker than told...looks great with the backsplash

not an outlet cover. you need to make your own cuts.

WORTHLESS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Fast delivery and low shipping charges. Too bad it is no longer avaiable at the store.