Customer Reviews for Everbilt 72 in. x 1-1/2 in. x 14-Gauge Slotted Zinc-Plated Angle

Well machined and finished angled steel bar. Good thickness for my needs.

One thing you need to count on when buying slotted channel or slotted angle is that the holes will line up. After building a project and having it go wrong I thought perhaps I rushed the job because of pain and measured my cuts wrong. So I went back and purchased two more pieces brought them home this time determined to make sure everything was right before making my cuts. So I tried every which way possible to get the slots and holes to line up, I can get about 1/4 of the holes and slots to line up. There is some sort of manufacturing error where if you buy these for a project and need matching angles with holes or slots to land in the same spot this is not the product for you. Perhaps my HD had a bad batch or maybe it was never intended for the holes to line up. Either way This stuff is useless for my purposes.

This was an easy way to mount 2 Little Libraries /Free Pantries to a 4x4: the 36 inch length was easy to cut into 4 lengths of 9” each using a hand hacksaw. The steel was actually easier than I thought to cut by hand! I used 2” long lag bolts, two per side, to mount two of these to each 4x4 top, and then held the Little Library to it with 4 nuts, lock washers and bolts. Easy Sunday-afternoon installation project, very much appreciated by our Church and Cub Scouts!

2 pieces of this worked perfect to reinforce a garage door that was bowing from the pressure of the automatic door opener. Our door is 9 feet wide so I let it overlap in the center where the opener arm is attached.

Description says 5 pack. After going to two stores, it seems as if that's a "mistake" because that's the price and sku for one piece.

Used for security on a window, fit the purpose exactly.

The material is smooth, easy to cut, and straight. I used the material as a support for a hanging shelf with one angle lag bolted to the ceiling joists and the other angle being the hanger.

I used this to install a garage door opener ceiling mount. It's versatile, strong and stable.

You can always find what you need for Small and Large projects. I Returned this piece for the same size, Flat stock. BUT it worked perfectly, I built a Horn and Speaker mount. In the front of the car between the bumper and the Radiator. It fits just right. NOW I have Air horns, an old time Aooga HORN, and PA. SO I can Yell at Girls in Bikinis. BUT if you have a project, check out Home Depot. They have Everything.

I had to redo the supports for the garage door when I installed osb on the ceiling. I reused the metal that came with the garage door after cutting it a bit shorter, and added this as the horizontal piece on the ceiling after cutting it to length also. The combination of holes/slots made it easier to line up the pieces, but also can require planning ahead, especially when cutting multiple pieces, to get lined up with the correct holes/slots for your particular project.

Strong enough for my needs which was support for fence wheels

I used to raise a computer screen above a second computer screen. It is completely fine for my purposes.

I've used this material numerous times in the past for easy and convenient building materials for shelving units, scaffolds and other structures. the slots and holes make rapid prototyping simple.

Worked well for garage door repair. A slightly thinner gauge than what was being replaced but should hold up.

A good quality slotted angle at a good price.

Good product and very versatile. Easy to work with and has multiple uses.

Needed to fix garage door cable management. Easy to install and very sturdy.

A broken spring and I can't find the big piece. The replacement has a safety cable that keeps the parts from flying around and bending the support frame. The new angle iron replaced the bent part like new again.

This was perfect for what we used it for so glad we found it but Home Depot always comes through