Customer Reviews for Dasco Pro 3/4 in. x 7-1/8 in. Cold Chisel

Works well

Tough little tool. I need it to chisel out some very solid concrete and was concerned it may dull. It didn't. Worked perfectly, good quality steel.

Rating provided by a verified purchaser

Well made, works good!

Works well, holds up to tough jobs at hand and durable enough to complete any task time and time again.

The cold chisel helped me remove a nut that had frozen on the base of my old kitchen faucet underneath the sink that I was removing

cuts through metal, as promised

Has good length and good size head to be able to hit with hammer. Helped me get to spots I couldn't with just the small sledgehammer

I hit this with a 6 lb sledge hammer repeatedly. The only damage it did was some lost paint. Nice tool

It worked well

Worked great. I used it to chop concrete that is mostly rock, and which has been curing for over 100 years. Did a beautiful job.

Rating provided by a verified purchaser

All you can ask for in a cold chisel! Broke up that old black iron toilet flange like it was made of glass.

Hammer end mushroomed to easy

Rating provided by a verified purchaser

I used this to try to cut off lug nuts on a car wheel. The studs were stripped and spinning in the hub so had to use caveman methods to get the nuts off. After drilling holes through the nut I then used this chisel to (try) cut through the nut. The chisel edge was quickly deformed and dull. It hardly cut anything. This chisel is too soft to cut any regular steel, might be Ok for brass or copper.

Well made .. I used it to chisel away excess concrete leftover on brick jobs .. Works great

I purchased this a while ago, and they have since changed the design. Mine was basically a flat bar with a chisel end. They updated it to make it hexagonal with a larger striking face. I have used my chisel for general cold chisel stuff, like shaping metal.

The Chisel works as it is intended, keeps a good tip