Customer Reviews for BEHR Premium Advanced DeckOver 5 gal. #SC-109 Wrangler Brown Smooth Solid Color Exterior Wood and Concrete Coating

June 2017, first photo. My pressure treated wood pool deck was 15 years old. Power washed all surfaces and lightly sanded any rough, splintered, or fuzzy surfaces. Painted (brush) all railing surfaces (vertical & some horizontal) with a single coat. Top rails and step rails two coats. But NOT the floor and stairs. Got lazy after brushing on the first coat and should have rolled out the second but alas, I didn't. Floor and steps lasted about two seasons and then started to peel. So, this year instead of repainting floor (and rails) I replaced them with composite decking material. (Remember this is a pool deck) Second photo (July 2021) shows the new composite floor and rail BUT I want you to focus on the existing vertical deck surfaces which were painted four years ago. They look like they were painted yesterday. People ask if I recently repainted the deck. Deck Over has held up incredibly well on those surfaces, and I can only wonder if I had rolled on that second coat to the floor and steps if they, in fact, may have lasted longer before peeling. I'm currently using Deck Over again to repeat the process on my homes side deck.

Faded after one year. Make SURE you only buy what you need. Even unopened cans kept in the house will not be any good the following year.

We have two decks that were built the same time 4 years ago. One one we put Thompson Water Seal and the other (our larger deck) we added the Deckover product. The larger deck is now rotten where the other deck is still in great shape. As you can see in the photo, all moisture is trapped in the wood. And before you ask, I’m a builder and yes, I let my dry out plenty before adding this Product.

Covered deck just about perfect and really love the color. Definitely clean area before using. Made a beat up deck brand new again!

Bought this product and had high hopes for it. Followed all the instructions. As others have said it, it is very, very thick and the coverage does not go as far as they say it does. It took me over 3 days to do my deck. It looked awesome when I was finished! Within a few months, it started to peel as others said. OK, no big deal, I did touch-ups and it was all good. Then it started peeling more and I noticed how wet the deck was underneath it (see pictures). As others have said, it traps the moisture in and has been slowly rotting my deck. This expensive project has turned into a huge mess that is going to cost a lot of money to now fix. If I could give it 0 stars I would.

Just finished my deck and it looks great!!!! Yes it’s thick to put on but in the end it filled in the cracks and looks awesome!

Bought this to put on our deck. Label says is solid dark Brown. Opened the can and it is gray, tried to mix it up still gray. Stuff is very very thick as well

After sanding, using deck cleaning wash prep and waiting the appropriate 2 days for deck to dry, I proceeded to paint. It is tough to rolls it thick but gave great coverage. I was thrilled, until spring. The paint peeled off in strips, blistered and is worse looking than when I started. Horrible to sand off so I can start over.. DO NOT use this product. It even comes off the railing onto bare skin. Never actually adhered to the wood, just sat on top waiting to blister

Don't be me. Don't read all the bad reviews and think you can make it work. This is seriously the worst product I have ever had the misfortune to use. It isn't oatmeal. It's thick, crunchy peanutbutter that goes on just the same. I have a very large deck and I bought all the recommended rollers and did everything according to directions. I started on the rails and knew I was in trouble, but I didn't stop. I was certain I could make it work. It looks like crap. I used every painting tool on the market to try and make this a smooth finish like it states it is. I did have some luck using a little edging tool and painstakingly smoothing a very thin layer over the wood. But I had to get a new pad every fifteen minutes or so because this garbage paint gets hard, thick and chunky within minutes of it being exposed to the air. Then you get those awesome super chunks that do not smooth out. You can't sand them away. You can't peel them away without tearing up the wood. I hate this stuff. I've finally called mercy. The front portion of my deck is trashed with this paint. I'm going to do something I hate and buy another paint to finish the other two sides, because this is just a horrible disaster. And just for those who actually want a gray shade, this isn't it. It's white. I'm not a novice painter. I know what I'm doing. This is truly just a horrible product. Family happened to come over and noticed the small section I started and laughed. They just replaced their deck this year because the person that owned the house before them put this on their deck. It is THAT bad. Once it's on, it's forever. I used a nonshedding, 3/8 nap roller to try and get a smooth finish. It didn't work. It's just so bad. Heed the warnings and find something else.

It took me weeks to prepare my deck. Replaced cedar boards that were bad, sanded the entire deck, sunk any screw heads that were too high, filled every crack and screw location with Bondo for wood, washed and cleaned the deck twice before applying DeckOver. Waited longer than recommended after washing or rain before applying DeckOver. Looked great for 8 days, and then it started bubbling/blistering. I am extremely disappointed !

Wasted money!! Super thick, won’t pick up on recommended roller nor spread evenly. Tried two different rollers with no success. The area that I painted looks awful! The stuff was drying in the pan before I could even get it on the patio. Can’t believe I wasted an entire Saturday trying to get this to spread.

My $8000 deck is ruined. I went by directions and year after started peeling and now I got holes rotted. My wife walked out and hit a rotted spot and went ankle deep and cut her ankle. I tried to do this before and of course no response. Now I have to replace at least 20 boards and scrape deck over paint off. Gonna be fun. Do not buy this stuff. Looked great at first though. I just want it fixed but I know I'll have to pay to get done or do myself. Hard when you work everyday. Not a happy customer at this point.

Follow the directions and you won't be disappointed!! Before, during and after

Please do not allow a sales associate to push this product on you. Let someone who actually has used it tell you about it. First off, it sets and drys so fast while you are rolling it on, now wonder I see all the complaints on it peeling. It does not soak into the wood, the product basically drys and configures to itself. I got this crap on my hands after a few hours of working, bam it comes right off, meaning it didn't even stick to my hands. I replaced a lot of 1x4 planks and sanded the deck. So I preped really good. I was tired of stains that never matched or still let sun damage in, so I thought this would be great. Why on earth is this product on the market, it's basically chemicals on a can and they know it's garbage. I added a photo to prove I just used it. I guarantee this will peel in a few months.

I would give no stars if possible. We painted the deck in the fall with Advanced Deckover. The deck was prepared down to bare wood.This spring the paint on the deck was peeling in strips. We had to remove the loose paint and repaint!!! I would never recommend this product

I dont often write reviews but felt compelled because of the misery this product has caused. Let me start by saying we are freaks about following instructions so the preparation and application were done correctly. Afyer a year the product is chipping and peeling horribly. Its just a mess. And our deck is covered ny an awning for the summer months. And yes we have snow in winter but this is simply not acceptable. As I write this im traumatized on how to resolve because I don't have 30 hours to strip and sand off like others have had to do. Behr offers no help, rather suggest it wasn't applied correctly. I'm confident all the high ratings were from people that just applied it because it looks great when new. But give it a year. Do yourself a favor, Google all the issues people have had after a year and how many decks its ruined. They shouldn't even be able to sell it....its horrible.

My deck is 21 years old, in 2016 I painted it with Behr deckover in a cedar color and was very impressed. This spring is the first time I have had to repaint the deck since 2016. This time we went with the stonehedge color. I believe the paint lasted so long in good shape was due to my prep work. I power wash the deck, then sand using a belt sander with 36 grit sanding belts, power wash a second time and apply the paint when the temperature is below 85 degrees and never in direct sunlight. The first coat I apply with a 3inch brush and the second coat with a roller. I am very impressed with this product and will never use anything else!

I was hoping based on photos I had looked at online that this Bordeaux paint would be a deep maroon, but as soon as I opened the can I saw that it was 100% dark purple with no reddish tone at all. I thought maybe once the paint dried it would look more like the photos, but that was not the case. Very disappointed in the color, but it did make my 12 year old deck look like new. The paint filled in the cracks well and even coated some of the very aged areas. There were no reviews of this color anywhere, so I thought I'd let others know how inaccurate the stock photos are.

I took days to PROPERLY use this product. A 16x20 deck 7 feet above ground. It ruined my deck and now I am scraping off the useless product. It bubbled, coukd be blown up with an18volt leaf blower. Im finally selling my house and now i am scraping it to rekease the moisture under the paint that did adhere. Do NOT buy this product. You will ruin your deck! Wasted so much money.

Amazing results! Highly recommend it.

Did everything they recommended to do. Even went over quick with sander to get anything loose. Power washed used their cleaner. It was done right. Paint didn’t even last then a reason. Now I’m out there scrapping by hand to remove the bad paint. I would never recommend this paint for your deck. Waste of time an allot of work.

I researched this and other products very thouroghly. While I'm not a professional painter, I am very skilled when it comes to all facets of home improvement. And to preface this post - I followed all Manufacturers Instructions and watched every video out there. I prepped all surfaces as instructed. Here's what they won't tell you: 1. This product is very very very thick. Almost like cake or brownie batter. 2. It dries super-fast!!! You have to work fast!!! If you think you can use a brush and go back over something, you can't without it "caking up" and creating clumps, consistent to ground-up oreo cookies. 3. Mix the cans and buckets frequently.. Keep them out of the sun... a thick film will form on the surface -it will ruin the can and cannot be used again... 4. Buy lots of cheap disposable bushes and rollers. For the same reason... Once this product dries, you won't ever get them clean. 5. The cooler the weather, the better the application - as the temperatures really affect the product. 6. Oh - and the info that 1 gallon covers 75 sq feet? Not even close. Double your estimate. In summary. This stuff works. However, it's not as easy to prep and apply as advertised. And prepare to spend WAY MORE MONEY on materials for your project. I've included pics... You can see the treated and untreated areas. It's a 600 sq ft deck... fully sanded and cleaned.. took about 10 hours to do what you see...

So got this for a temporary fix on an ugly deck. And it that temporary was waaaaaay shorter then expected. Used a few 5 gallon and then some gallon for touchups the first few months then gave up. Months i had peels a year was a mess and attached is two years later. I read Behr’s recommendation of sanding and touching up, yeah not going to waste any more on this. Pup in pic doesn’t scratch the floor if you are wondering. Damage was done all by it self.

It looks much darker in picture....it should be called milk choclate brown....the color is on the left of photo....if I new it was so light I wouldn't have ordered...

We did everything we were supposed to. And it still peeled. And now it’s a nightmare And where it is coming off the wood is still wet underneath. How is that possible.? It’s not in my budget to replace my entire deck. Not happy at all.

I bought this product to cover an 1100 Sq. Ft. Deck. I walked into Home Depot planning to buy (3) 5 Gallon Buckets based on Behr's recommendation of 375 sq. ft. coverage per bucket. I then read that I needed to do 2 coats, so I bought 6. Got home, rolled with a 1/2 inch roller as Behr recommends, liberally. Got to the end of my deck within the first bucket. I've been a contractor for 20 years, I didn't paint it on thin, I didn't water it down, I put a nice full coat over every inch and got 3 times their stated coverage out of the product. Now have 4 extra, non-returnable buckets of this stuff (about $600) that are essentially useless to me. Great profit for Behr. To add insult to injury, only about a week old and bubbles are appearing in many places on the deck (see image). My deck wasn't old, it was just built. The lumber is #1 DF boards that were dried for 3 months prior to installation and freshly primed. If this stuff couldn't stick to that, it can't stick to anything. Not happy with initial result and poor long term reviews here are creating concerns about longevity of this low quality, expensive product.

We have a very large deck and we invested a lot of money to redo it. We followed all the instructions Behr recommended and it looked so beautiful at first! We used Behr Advanced DeckOver in May 2020... its currently April 2021. It is peeling and looks absolutely terrible! Would not recommend this product!

So disappointed in this product. I used the textured deckover before with great results. Replaced my deck and followed the instructions to perfection with the expectation I would have the same results as before. I now have a HUGE MESS!!! Would NOT recommend this product!

prepared my steps properly and they came out amazing

I used Advanced DeckOver in the fall. I prepared the deck well and followed the instructions. At first it was really nice but it did not last. It has been only 6 months and the paint is peeling. My deck will need to be refinished again. I am incredibly disappointed in the quality. It has turned out to be a waste of money, and more importantly a waste of my time. Very Dissatisfied!!