Questions and Answers for Zinsser Cover Stain 5 gal. White Low VOC Classic Oil-Based Interior/Exterior Primer and Sealer

A:  Happy to clear things up, Mary! At this time, Rust-Oleum Zinsser Cover Stain Low VOC Classic Oil-Based Primer and Sealer is only available in 1 or 5 gallon buckets. Due to shipping purposes, this primer is only available as a case when ordering online. A cause contains 2-1 gallon buckets. This is a one-part primer. - Rust-Oleum Product Support 3

A:  Thank you for reaching out! Our Zinsser Cover Stain Classic Oil-Based Primer may be top coated after it has dried for 2 hours over new or porous surfaces. If the primer is applied over a previously painted or sealed surface, we recommend waiting 3-4 hours before applying a top coat. There is no time limit for applying a top coat, however, dust and other contaminants may settle on the primed surface over time, causing adhesion problems when a top coat is applied. - Rust-Oleum Product Support 2

A:  Happy to help! Rust-Oleum Zinsser Cover Stain Oil-Based Primer can accept a water-based stain, but you'll need to make sure the stain is solid and not semi transparent. You'll also want to verify that the product can be applied to a painted surface and does not require it to be applied into a porous substrate such as wood. - Rust-Oleum Product Support 1

A:  Yes.

A:  YES

A:  It is a true oil.

A:  Thank you for reaching out, John! Rust-Oleum Zinsser Cover Stain Low VOC Classic Oil-Based Primer and Sealer is VOC compliant across the country. This product offers excellent adhesion to smooth, hard, and glossy surfaces without the need for sanding. Since this product is oil-based, it is great for wood surfaces. If you have additional questions, please feel free to give us a call at 888-855-1774 to talk with us! - Rust-Oleum Product Support 3

A:  this product is different compere with that oil base was use back on the 80's

A:  Thank you for reaching out! We do not recommend thinning our Zinsser Coverstain Classic Oil 100 VOC Primer. If you have any additional questions, please give us a call at 888-855-1774; we are happy to help! - Rust-Oleum Product Support 2

A:  Yes, this product can be used with any topcoat.

A:  We are here to help! Yes, Rust-Oleum Zinsser Cover Stain 100 VOC Oil-Based Classic Primer can be topcoated with latex-based paint. - Rust-Oleum Product Support 3

A:  This product works well on MDF. I've made numerous built-in bookcases with this stuff and have finished by sanding and then covering with multiple coats of white semi-gloss. Finished product always comes out nice. Zinsser also makes an alkyd base version of this, but on comparing the ingredients, the alkyd version does contain a large amount of water, which scares me with MDF, so this is my go-to!

A:  you must use at least height gloss

A:  I am not sure. I used this because when removing 40yr old wall paper it removed all the drywall paper. There was no protection to prevent the drywall from being damaged. I CAN TELL U THIS MAKE SURE U USE A RESPIRATOR W THIS STUFF IT IS VERY VERY STRONG. AND IS VERY THICK!

A:  I think an oil based primer would seal the mdf better than a water based primer and you can cover this primer with a latex based paint. For the best results you need multiple coats of primer and sand in between coats. I suggest you do some more research on how to prep/paint mdf.

A:  We like the way you think! Rust-Oleum Zinsser Cover Stain Classic 100 VOC Oil-Based Primer is great for all types of wood surfaces! This primer can be topcoated with either oil or water-based products! - Rust-Oleum Product Support 3

A:  The best thing to do is strip the wallpaper; clean the walls; and then prime the drywall. I would think if any product would work on wallpaper it would be this primer but I would check with the associate at the Home Depot paint counter to make sure.

A:  Jess, yes our Zinsser Cover Stain Classic Oil 100 may be used to prime over porous and nonporous wallpapered sheetrock prior to painting. - Rust-Oleum Product Support 2

A:  Usually 4 to 6 hours before you can top coat. Keep in mind it is better to apply two thin coats rather than one heavy coat. It takes a bit longer for your project, but the results will last longer.

A:  Dry time can vary considerably due to a lot of factors like the humidity but I normally give it 24 hours to dry completely before applying a top coat. I would double check and feel the primed surface before painting and if it feels tacky then it needs more dry time.

A:  Great question! When applied to a sealed surface, Rust-Oleum Zinsser Cover Stain Classic Oil 100 can be recoated with paint after 3-4 hours. A full cure will be achieved in 7-10 days. - Rust-Oleum Product Support 4

A:  Happy to help! Rust-Oleum Zinsser Cover Stain 100 Oil-Based Classic Primer does vary slightly from Rust-Oleum Zinsser Cover Stain Oil-Based Primer and Sealer. They offer different dry and recoat times and we do not recommend boxing or intermixing the 2 products together. https://www.homedepot.com/p/Zinsser-1-qt-White-Cover-Stain-Oil-Based-Interior-Exterior-Primer-and-Sealer-3504/100398403

A:  Yes, this is the same product as the quart size #3504.

A:  You can buy the same primer in a quart size which is model #3504 as you mentioned.