Questions and Answers for Westinghouse Elite 48 in. Indoor Brushed Nickel Finish Ceiling Fan

A:  We have one in each of our bedrooms, including our master bedroom, and they are great! Air flow is superb! I'm sure you could also place it your master-bath and be very pleased with it, as well. Hope this helps!

A:  I don't see why not.

A:  Yes, I guess it could be used anywhere. If you have a lot of moisture in the bathroom, you may want to consider a fan with metal blades. This is a beautiful fan, and you can point the spots in different directions.

A:  Yes, this fan can be installed in a bathroom, as long as it is not directly exposed to water.

A:  No, they are the same color on both sides.

A:  No the blades are beech blades and they do not have a finish on the reverse side of a different color.

A:  No, the blades are not reversible.

A:  Unfortunately, replacement rings are not available. I have been looking for them as well, but the manufacturer does not offer them.

A:  Hi Jacko, I believe it would be best to reach out to the manufacturer, Westinghouselighting for assistance. I have linked their website below with their contact information page so that you may receive the best details from their specialists. Hope this helps! We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot! http://www.westinghouselighting.com/contact-us/

A:  Westinghouse does not sell replacement trim for this fan. I wrote a long answer to a similar question that attempted to explain why so many people are missing this part, so I won't repeat myself here. If you're lucky, you might be able find an old fan for parts. You definitely call Westinghouse to complain because their position is that you don't need these since the parts are just decorative, even though the fan looks terrible without them. If Westinghouse doesn't understand that people care about the appearance of their light fixtures, they should not be in the business of selling fans.

A:  These are not sold separately as these are only a decorative item and are not needed for the performance of the fan. The fan came with these at the initial purchase.

A:  The blade pitch is 12 degrees.

A:  I do not believe so.

A:  No, this does not come in 220 volt.

A:  Not that I am a where of

A:  Yes, it can but you would need to get a longer down-rod (they sell multiple lengths ... depends on the pitch of the ceiling and how far down you want the fan to hang).

A:  Yes, this can be installed on a sloped/vaulted ceiling as it is with the 4 inch down rod included up to an 18 degree slope angle.

A:  No, you need to get a wall control that is designed to control both motors and lights. A dimmer works only with lights (and the one you asked about will not work with LED lights. You should consider upgrading your bulbs to LED (at least when the original halogen bulbs burn out) because LEDs use much less energy and don't get as hot as halogen bulbs. There aren't many fan light controls out there yet that work with LED bulbs. One option is Legrand 3-Speed 15-Amp White Indoor Slide Fan Control Model # LSCLDC163PWCCV4

A:  No, you cannot use a wall dimmer with this ceiling fan. You would need to use a ceiling fan wall control that operates both the fan and the light (it will have dimming capability when using incandescent light bulbs). By Westinghouse Lighting Consumer…

A:  I used a Hampton Bay universal. Model 68130 cost 29.97 you can use the westinghouse . Depending what you can find in your store.

A:  I would recommend item 7787000.