Q:Two questions. How long does this keep the light on and two can it handle putting a plug adapter into (garage light bars are a 110 wall outlet connection)
by|Dec 8, 2023
1 Answer
Answer This Question
A: This control has a 10-minute shutoff. Without knowing exact details of your light bars, we cannot guarantee compatibility.
by|Dec 11, 2023
Q:Does this sensor work only on 110 V or will it work on 220 V as well? Thanks in advance.
by|Nov 24, 2021
1 Answer
Answer This Question
A: Hello Bill, thank you for your question. This light control will work on 120 V maximum. If you have any further questions please contact us at (610) 336-1330 or customerservice@amertac.com.
by|Nov 29, 2021
Q:Why buy this product ? It consumes 3.5W of quiescent power. That means it is consuming 3.5W 7 days a week, 365 days a year. One would have to use a 40W incandescent bulb "to be worth it.".
by|Nov 17, 2021
1 Answer
Answer This Question
A: Hello Harry, thank you for your question. Yes, the standby power is 3.5W. This is the average consumption for this type of product as it needs to have relay standby for any motion sensed.
Q:if i place the bulb in my lamp will i have the ability to turn on and off the item?
by|Dec 30, 2016
4 Answers
Answer This Question
A: This fixture is the switch. It could work on a switched circuit.
by|Jul 20, 2023
A: Hi there. This specific light control is to be used with a ceiling mounted, bare bulb light socket and the switch connected to that socket must be turned "ON" after installation for the light control to work. Turning the switch "ON" will not turn the light on; instead, it will allow the light control to come on when motion is detected.
by|May 4, 2023
1 found this answer helpful
A: Yes, if the lamp has a switch.
by|May 4, 2023
A: Only if it's on a switched circuit.
by|May 4, 2023
Q:What is the field of view for the senser?
by|Jun 13, 2016
3 Answers
Answer This Question
A: When it works it has a 120 degree view
by|May 4, 2023
A: 360 degrees.
by|May 4, 2023
A: The sensor has a 120 degree detection zone, and can be rotated 360 degrees.
by|May 3, 2023
1 found this answer helpful
Q:can this item be installed in ceiling fan
by|May 28, 2016
4 Answers
Answer This Question
A: It may work, but it will likely be problematic. The ideal position for it to be installed is in a vertical, mounted, uncovered socket. Many ceiling fans have angled light sockets, so the light control may not work as well as it was designed to.
It depends on the fixture itself, but a lot of ceiling fans have cones that cover most of the bulb for better appearance. If the cone is covering part of, or the entire motion sensor, it won’t work properly. The light control also cannot be behind glass or plastic of any kind.
by|May 3, 2023
1 found this answer helpful
A: Sure; why not?
by|May 4, 2023
A: Most are to be installed directly into the ceiling fixture, not into a 'fan'. I would recommend you ask the manufacturer. Do not go on someone's opinion.
by|May 3, 2023
A: Not ideal. Most fans are getting away from this type of socket.