Questions and Answers for Wagner HT4500 Heavy-Duty Heat Tool Set

A:  I would guess that you could, depending on the size and thickness of the foam. This heat gun has variable temperature settings and generates a good amount of heated air.

A:  Yes you can. Keep it moving to prevent melting.

A:  The HT4500 operates on 120 volts. If you need further assistance feel free to call us at 1-800-328-8251.

A:  Yes, this uses 120V.

A:  The HT4500 can be used to soften varnish to make it easier to remove. Just like with any use of a heat gun be aware of the material underneath what is wanting to be removed. Keeping the heat directed on a specific point can cause damage. Please call our technical support staff at 1(800)328-8251 if you have any other questions or needs.

A:  The HT4500 has a 5 year warranty against defects in material and workmanship for homeowners. It has a 30 day warranty against defects in material and workmanship when used commercially. If you have any further questions please feel free to call us at 1-800-328-8251.

A:  The HT4500 has 55 temperature settings, 5 fan speeds, 4 nozzles and a 5-in-1 painter’s tool and a case to help accomplish any project that requires heat.

A:  Yes it can. Keep in mind that this tool is not rated for commercial applications. It is meant for small, around the house projects. Many variables affect heating applications, such as the material being heated, ambient temperature, the distance from the gun to the substrate and the heating technique. For this reason, Wagner has provided temperature guidelines for certain applications. Always start the heat gun at the lowest temperature in the range then raise the temperature until the optimum temperature is achieved. Always keep the heat gun in motion and at least 2” from the substrate when applying heat.

A:  Heat guns are a great way to loosen wallpaper. The 4500 will not need to be at it's highest temperature setting for this use, a medium setting should work just fine.

A:  This model has an on/off/cool down switch.

A:  The HT4500 does not have an auto cool down, but it does have a switch that can be slid to a cool down mode.