Questions and Answers for Swan Drop-In/Undermount Solid Surface 33 in. 1-Hole 55/45 Double Bowl Kitchen Sink in Bisque

A:  No, this sink will not work in a 36" cutout.

A:  Thank you for sharing. Swanstone does not manufacture a sink near those dimensions.

A:  No, it cannot be used.

A:  Faucet yes, without the Escutcheon plate though. and not with the spray unless you drill a new hole. which would not be too difficult.

A:  Yes, but without the escutcheon plate. also if you want to use the sprayer you will have to drill a new hole. but should not be too difficult to do.

A:  Yes, I installed a one hole faucet is in this sink.

A:  It is hard to provide a definite answer but this faucet should probably work. The KSDB-3322 sink comes with one faucet hole pre-drilled. If using the faucet plate with the faucet, you will probably need to drill one of the faucet holes out to the right of the pre-drilled hole to allow for enough room for the faucet plate. An additional hole will need to be drilled on the corner to accommodate the sprayer. Faucet holes are easily drilled using a hole saw with a carbide tipped blade. Good look with your new sink and kitchen remodel!

A:  The KSDB-3322 sink will fit in a standard 24" D cabinet base. The drain holes are placed toward the back of each bowl. The center of the drain in the left bowl is 8-13/16" in from the left side and 6-3/4" in from the back of the faucet deck. The right drain is 9-3/16" from the right side and 9-3/4" in from the back of the faucet deck. Under the Info & Guides section, there is a Specification page showing a line drawing which will provide additional information which may be helpful. Hopefully, the KSDB-3322 sink will be just what you are looking for!

A:  NO , it is a matte finish and in a warm white color. Will not match white fixtures well.

A:  Yes , I bought it and it’s beautiful.. however it stains. I would buy it again but you have to be on your toes to keep her sparkling .. magic eraser works great and oh .. it’s not high gloss.

A:  NOT high gloss. It's a dull finish and you would use an abrasive cleaner such as comet. It does seem to mark up easily from larger pots and pans. It looks good and we are mostly happy with it.

A:  Hello, this product has a matte finish. If there is anything we can do to assist you, please reach out to Swan at 1-800-325-7008 between 8am-4:30pm CST, Monday Friday, or at help@swanstone.com. Thank you for your interest in Swan!

A:  Not really

A:  Not high gloss...matte finish

A:  no you buy those separately depending on the finish you want...chrome, nickel, etc...

A:  Thank you for your interest in Swan kitchen sinks. The KS03322DB.010 does not come with trap or faucet. Good luck with your project.

A:  Swan's solid surface products such as the KS03322DB.010 sink have a matte finish that is easy to clean and maintain with common household cleaners. Abrasive cleansers such as Comet or Ajax are approved as well as a nylon scouring pad or a Mr. Clean Magic Eraser. Food-based stains can be removed using a 50-50 mix of bleach and water and allowing to soak for 15 minutes. For rust or mineral stains, rust-removing products are acceptable. Do not use a metal scouring pad. Please reach out to Swan's customer service 800-325-7008 for additional help.

A:  Mr clean magic erasers did not work for me...super bummed.

A:  The KS03322DB.015 has a flat top which allows for it to be undermounted with supplied clips. The clips are attached to the counter and the sink is tightened. The lip of the sink will be secured against the bottom of the counter. Then the seam between the sink and counter is filled with silicone. You can contact Swan customer service 800-325-7008 for more detailed information.

A:  Thank you for considering Swan products. If you call Swan customer service 800-325-7008, you can order a color sample and compare it in person.