Questions and Answers for Superior Building Supplies Faux Reclaimed Brick 32 in. x 47 in. x 3/4 in. Panel Dove White

A:  Hello Sandy, Yes we do have comer pieces available and panels can be mitered to create corners as well. If you have addition questions or need help finding the corning on Home Depot website, please call us at 888-328-9232.

A:  No. The alternative is nails which my contractor used. These are HEAVY siding panels. Check out the weight for one box. They would fall off the wall with glue!

A:  It may work on some surfaces, but it's recommended to us a combination of both.

A:  Below is a link to the installation instructions. https://images.homedepot-static.com/catalog/pdfImages/0d/0d148a30-8fd0-43f2-b404-c350af14a001.pdf Here is a link to the accessories for around windows, corners and and outlets: https://www.homedepot.com/s/superior%2520building%2520supplies%2520stone%2520veneer%2520accessories?NCNI-5 Charlotte of the Home Depot How to Community

A:  Not that I am aware of. It is tricky fitting the panels in corners, but I got some PVC trim, that looks like white wood, had it trimmed to fit, that I used around areas like that, from Home Depot. It is similar material to the siding panels. My Contractor simply measured and cut around all that was needed. Including electrical. My panelling was put where there was previous rock face (taken away), and over the concrete foundation, as well as around the side lights, door, porch light, utilities pole, trailer power line and brick flower box. (Please note that I am currently painting attached fence, so plants have been moved aside for now). Work in process!!

A:  Hi Danoman: thank you for your question. Samples are available on Home Depot.com. Also we are happy to send samples out as well. Please feel free to contact our customer care team for additional assistance. 888-328-9232.

A:  Hello Joe, The bricks are approximately 7-7/8. There is a minor difference between brick to brick. If we can be of further assistance, please contact our customer care team at 888-328-9232.

A:  Each brick measures approximately 7-7/8'.

A:  You could, with really long screws or nails, but this is rugged thick siding panels, so I wouldn’t use this product in the kitchen myself.

A:  You could, but I wouldn't suggest it. These are thick panels.

A:  Yes, support for the back is needed.

A:  Yes

A:  Yes you do for support very happy on how ours turn out.

A:  Yes, contractors can cut the panels to fit what you need. My front entrance was very busy to work with. I'm still painting the fence there at my duplex. Double or triple the amount you think you need. They work better if they are snapped together properly. I removed rock face from the front of my duplex side.

A:  Yes you can as I blended mine in after taking rock face off. If you end up with an unfinished end, just buy some trim in same material at Home Depot to finish it flush. Mine is 90% done, waiting for warmer weather to finish.

A:  Hello Iris, Thank you for your questions. Corners can be solved either by purchasing one our pre-made corners or by mitering the panel to go around the corner. You can cut electrical outlets by drilling a small hole in the center of the panel and also the four corners of the area that you are wanting to remove. Once drilled, use a jigsaw to remove the remaining pieces. For additional assistance, please contact tour office at 888-328-9232.

A:  Measure twice. Cut once! Lol. The Contractors used a light saw the fit to measure. It's still a work in process as I'm painting the adjoining fence panel.

A:  This product is 32 inches high by 47 inches wide.