Q:Can you do customized accordion door, I need 53 inch width, I feel like two of the 36” will look weird
by|May 14, 2024
1 Answer
Answer This Question
A: The width of the Via 36x80 folding door cannot be altered. You can special order a folding door for your finished opening width under our Express One line of folding doors. Please contact your local store and they can build a quote for you. Hope that helps!
by|May 16, 2024
Q:Can I trim this doors at the bottom?
by|May 2, 2024
1 Answer
Answer This Question
A: You can trim the height of the Via 36x80 door by trimming from the bottom of the door.
by|May 3, 2024
Q:Can this be paint!
by|Apr 30, 2024
1 Answer
Answer This Question
A: We do not recommend painting the Via Vinyl accordion folding doors.
by|Apr 30, 2024
Q:I need to install something like this in a kitchen passthrough that is 45 inches tall. Can these be cut down that much? I think I would need to cut a good bit off from both the top and the bottom to keep the handle in the middle
by|Apr 23, 2024
1 Answer
Answer This Question
A: The top of the Via door cannot be trimmed as the pre-drilled holes for the top glide installation are located there. You should only trim the door height from the bottom of the door panels.
by|Apr 25, 2024
Q:I have a width of 51", will the 48" door be ok if extended 3"? Does the 80" height include the supporting hardware, so if my opening height is 79" how much will I have to trim off?
by|Apr 22, 2024
1 Answer
Answer This Question
A: If the finished opening is adjusted down to be a 48" width, the Via 48x80 door can be used in this opening size. The 48x80 is the finished opening size the door is made to fit into. The actual height of the door is approx. 78.625" to allow for the top track, top glides and floor clearance. You can trim the door height if needed after measuring. The width of the Via door cannot be altered.
by|Apr 23, 2024
Q:Can I attach this door to a ceiling that's diagonal instead of horizontal? Thanks!
by|Apr 22, 2024
1 Answer
Answer This Question
A: The Via 36x80 accordion folding door needs to be installed into a sound horizontal header and must also have a left and right jamb for proper installation and use of the door.
by|Apr 23, 2024
Q:Can the height be cut down?
by|Apr 16, 2024
1 Answer
Answer This Question
A: The height can be trimmed/cut down on a Via 36x80 accordion door. The width cannot be altered.
by|Apr 22, 2024
Q:Can you cut it down to a size for a trailer 24 in 70in
by|Apr 16, 2024
1 Answer
Answer This Question
A: The height can be trimmed/cut down on a Via 36x80 accordion door. The width cannot be altered. You can use the 36" wide door in a 24" wide opening. Our doors fit up to a 36" width. There will just be more fold in the door when closed for a 24" wide opening.