Questions and Answers for Spectrum 36.875 in. x 78.75 in. Fruitwood Vinyl Accordion Door with Hardware

A:  We do not recommend painting the Via Vinyl accordion folding doors.

A:  The top of the Via door cannot be trimmed as the pre-drilled holes for the top glide installation are located there. You should only trim the door height from the bottom of the door panels.

A:  If the finished opening is adjusted down to be a 48" width, the Via 48x80 door can be used in this opening size. The 48x80 is the finished opening size the door is made to fit into. The actual height of the door is approx. 78.625" to allow for the top track, top glides and floor clearance. You can trim the door height if needed after measuring. The width of the Via door cannot be altered.

A:  The Via 36x80 accordion folding door needs to be installed into a sound horizontal header and must also have a left and right jamb for proper installation and use of the door.

A:  The height can be trimmed/cut down on a Via 36x80 accordion door. The width cannot be altered.

A:  The height can be trimmed/cut down on a Via 36x80 accordion door. The width cannot be altered. You can use the 36" wide door in a 24" wide opening. Our doors fit up to a 36" width. There will just be more fold in the door when closed for a 24" wide opening.

A:  This door will work in a 28x80 opening. It will have more accordion than you may like but it is NOT supposed to lay flat across the opening. You can trim the height of the door; however, due to the design on this model, you cannot alter the width.

A:  You can use two 36x96 Via doors to create a double door for your opening size. It will just have a little more fold when the doors are in the closed position. You cannot alter the width of the Via doors. When using Via doors as double doors, please also note that there will be about a 1/4" gap when the doors are closed due to the magnets on the lead edges of the doors (panels where the handles are).