Questions and Answers for Slide-A-Shelf Made-To-Fit Slide-Out Shelf 6 in. to 36 in. Wide, Full-Extension, Choice of Wood Front

A:  No...everything needed except a Phillips screwdriver is included. Our made-to-fit slide-out shelves are easily secured to the base/floor of your cabinet or to an existing full shelf. A battery operated screwdriver is recommended. An installation template is provided.

A:  Everything comes with the shelves, instructions & accessories. Easy to install. Thoroughly enjoy them.

A:  Yes..here is the URL: https://www.homedepot.com/p/Slide-A-Shelf-Made-To-Fit-Slide-Out-Shelf-6-in-to-36-in-Wide-Full-Extension-with-Soft-Close-Choice-of-Wood-Front-SAS-SSO-MTF-S/300941158?

A:  My drawer shelves open and close very smoothly

A:  Yes, I believe but mine are not.

A:  Yes. There are two different custom order SKUs. I bought the standard slides. There is an up charge for the soft-close option. I have purchased both types, for different cabinet projects, and both are very nice. I’ve bought 8 so far and will probably install more in the future.

A:  I don't think easy close is available but the shelves glide very smoothly.  We are very pleased with them!

A:  Not sure. Is the 12 inches or the 8 inches the clear width of the cabinet opening or the interior depth? We manufacture to fit slide-out shelves for a cabinet's clear opening of 6 inches to 36 inches wide in 1/8 inch increments and for the unobstructed interior depth from 16 1/2 inches to 23 1/2 inches in one inch increments on the half inch.

A:  We custom make-to-fit our slide-out shelves to fit the clear opening width of cabinets from 6 inches to 36 inches wide and unobstructed interior depth from 16 1/2 to 23 1/2 inches in once inch increments on the 1/2 inch. Please be sure to use our Measuring Guide by clicking the Step 1 link in the Product Overview section under the main photo on our Home Depot Product Information Page. To begin your order click the link in the Step 2 instructions.

A:  I ‘m not sure I understand what your asking.  Are you saying the height of the opening is 8”?

A:  The base material for our slide-out shelves is made from 1/2 inch thick melamine. That shelf will not warp storing 60 lbs. worth of items. If your base cabinet is well built/secured, you install the slide-out shelf per our instructions and position your server in the middle and as far back as reasonably possible. You will not have any problems with our slide-out shelf storing your server...in or out of a cabinet.

A:  Where possible, we strive to package two fully-assembled slide-out shelves in each box. Our "dual box" measures approximately 9 inches high and 25 inches deep. The width is the variable and will always be 3 to 7 inches wider than the width of the shelf to allow for the cabinet rail hardware and protective packaging. Our strategy is to package two shelves with the same width or nearly the same together. Hopefully with this information and measuring the width of your clear cabinet openings you can estimate the width of the boxes we will likely ship in. An order of 11 shelves will typically ship in 6 cartons. For the odd shelf packaged in a single box, just replace the 9 inch dimension with about 4 1/2 inches. Hope this helps.

A:  Yes definitely plenty of room.

A:  If the surface of the floor of your cabinet is 5/8 inch below the top edge of the frame you will need to "build-up" the floor with some lumber materials to bring it flush to the top edge of the bottom horizontal frame. You would then install the cabinet rails of our made-to-fit slide-out shelves to the built-up surface.

A:  No.  You probably need a piece of wood at the bottom for the adjustment.

A:  Our slide-outs come with all hardware and an installation template to secure them to the floor/base of your cabinet(s) or to an existing full shelf. Installation details and a video are available on our product page on HomeDepot.com. We also provide a pictorial and detailed installation guide with each order.

A:  Follow the instructions step by step.  The instructions are very good and pretty easy to follow.

A:  The included instructions are pretty straightforward making the Installation better than the usual.

A:  The wrap around sides are made from birch plywood with a UV poly-urethane clear coating. The shelf base is 1/2 inch thick durable white melamine. The rails system is steel ball-bearing sliders. The front cosmetic trim is your choice of solid oak, maple, poplar or birch.

A:  You get your choice of wood, I chose poplar.

A:  Our slide-out shelf rail systems come with steel and adjustable L-brackets and screw hardware which are attached to the base/floor of your cabinet(s) or an existing full shelf.

A:  There are only 2 ways I can think of. 1. If you want the sliding shelves to extend the full width of the double cabinet you will have to remove the center vertical support and devise a method to stop the doors at the top and bottom. 2. have sliding shelves that only are 1 door width wide and install braces behind the vertical support, that will allow you to install the shelf guides at the mid point.