Q:Hi there, can these be used the pressure treated deck joist? If so, for the QUAD 2 x 10, what number sounds like #10 and what are the lengths of SD screws I need for the hanger to joist and the face? Thanks.
by|Oct 9, 2023
1 Answer
Answer This Question
A: Hi, thank you for your message. This is Ricardo with Simpson Strong-Tie. We want to make sure we address your HHUS hanger. For corrosion information and coating recommendation please click link below. Unfortunately, the HHUS is not approved, nor code listed for use with our SD Strong-Drive screws. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
https://www.strongtie.com/solutions/corrosion/wood-connectors-fasteners
by|Nov 16, 2023
Q:What is the difference between this HHUS410 and HUCQ410? Can both of them be used for the same thing?
by|Oct 28, 2022
1 Answer
Answer This Question
A: Hello Diane, I am Colin from Simpson Strong-Tie. On our homepage strongtie.com, enter HHUS410 or HUCQ410-SDS in the Search strongtie.com field to get more information on these face mount hangers. Both are designed to support a typical engineered lumber beam 3-1/2" wide and from 9-1/2" to 11-7/8" tall. Each requires different fasteners (the HUCQ410-SDS connector comes with the 2-1/2" SDS screws) and each has different allowable load capacities. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
by|Oct 28, 2022
Q:Can these be installed with SD screws?
by|Oct 19, 2022
1 Answer
Answer This Question
A: Hi Allpro, this is McKenzie from Simpson Strong-Tie. The HHUS hangers can be installed with the SD Screws. Please take a look on Strongtie.com and search HHUS and go to the section just below the load tables and you will see a load table titled "Load Values with Strong-Drive SD Connector Screws" to determine which screws you can use with your model HHUS and what the loads will be using the SD Connector screws.
by|Oct 20, 2022
Q:I need help from someone locating a hanger to fit an engineered joist measuring 3.5" w x 7 1/2 "H.
by|Oct 8, 2022
1 Answer
Answer This Question
A: Hi JayB, this is Ricardo with Simpson Strong-Tie. If you are looking for a face-mount hanger option, you could consider the HU48 or HGUS48. For other possible options depending on carrying and carried member please see our hanger selector application found in our website.
https://app.strongtie.com/hs?_ga=2.193553261.1765047342.1665412123-834405898.1665412123
If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
by|Oct 10, 2022
Q:What is the exact Simpson part number? It doesn?t seem to be listed. Is this HHUS210-4HDG?
by|May 21, 2022
1 Answer
Answer This Question
A: Hello Danny, this is Ricardo from Simpson Strong-Tie. The model number on The Home Depot site is in the upper right hand corner. When I click on the link you sent this question from, it points to HHUS210-4 for a 4 ply 2x10 joist. This hanger is the standard hanger with G90 galvanization. It is not the hot dipped galvanized version. That model number would be HHUS210-4HDG. I hope this helps. If you need further assistance with model numbers, please feel free to contact our customer service at 800.999.5099.
by|Oct 28, 2023
Q:Can this be used for a triple 2x12 beam?
by|Aug 18, 2021
1 Answer
Answer This Question
A: Hi Evan. Thank you for your inquiry. This is Ricardo from Simpson Strong-Tie. You may use HHUS210-3.Triple 2x10 will have same width as of triple 2x12 (1.5"x3=4.5") but it is recommended to check demand load when using triple 2x12. Demand load shall always be less than capacity of the hanger. You may find capacity of HHUS210-3 at following link.
https://www.strongtie.com/facemounthangersssl_solidsawnlumberconnector/hhus_hanger/p/hhus
If you need further assistance, Please call us at 800-999-5099. We look forward to hearing from you.
by|Aug 19, 2021
Q:Can I use #10 Strong-Drove SD screws to mount these?
by|Oct 6, 2019
1 Answer
Answer This Question
A: The HHUS48 can be installed with a quantity of 8 - SD10212 screws to the joist and a quantity of 22 - SD10212 screws to the face. Thank you!
by|Oct 8, 2019
Q:What is the actual width between the flanges (seat width)?
by|May 27, 2019
1 Answer
Answer This Question
A: The hanger width (between the flanges) is 3 5/8". Thank you!