A: Hi, The SharkBite 3/4 in. PEX Barb x 1/2 in. PEX Barb Brass 90-Degree Reducing Elbow does not come in a (10-Pack). If you have any more questions you can call tech support at 877-700-4242. Kind regards,
by|Feb 14, 2022
Q:If I use push these into pex pipe, do I need to use a clamp or crimp?
by|Apr 11, 2019
3 Answers
Answer This Question
A: Yes, absolutely. PEX fittings are definitely NOT friction fit only. Absent the compressed ring, the connection would likely leak with little or no pressure on it and would certainly fail under pressure.
by|Apr 12, 2019
A: Yes you must clamp these when installing them.
by|Apr 14, 2019
A: There are not push fittings. They will only work with some type of crimp ring to seal the fitting to the pex pipe
by|Apr 13, 2019
Q:Will this slide onto 1/2” copper pipe so I can solder this to an existing stub? Thx
by|Aug 14, 2018
4 Answers
Answer This Question
A: No you cannot slide this into a copper pipe. This needs to inserted into a pex/plastic pipe and crimped.
by|Aug 6, 2019
A: No, This is designed for plastic PEX plastic tubing. The barbs help keep the tube in place. You need a 90 degree compression type fitting. There is no pipe sweating or special tools required for this solution. SharkBite makes these.
by|May 14, 2019
A: I don’t believe this fitting will work with rigid copper, as it is a PEX fitting. The ridges on the fitting are designed to hold it in place inside the plastic pipe. You’d be better off getting a rigid copper-to-copper 90.
by|May 5, 2023
A: No. You would need to use a SharkBite PEX barb sweat adapter fitting. The barb end will be to install on PEX pipe and the sweat end can be soldered onto copper. You can also use our PEX barb stub out elbow or one of our SharkBite push to connect fittings. If you have further questions, please contact Customer Service M-F, 8am-5pm at (877) 700-4242.
by|May 5, 2023
Q:Are SharkBite products Made In America?
by|Mar 14, 2018
3 Answers
Answer This Question
A: No, this product is made in China.
by|Apr 6, 2019
1 found this answer helpful
A: All the SharkBite products I have are labelled “Made in China”
by|Apr 6, 2019
1 found this answer helpful
A: The majority of our products are made in America. If you have further questions, please call Customer Service M-F, 8am-5pm at (877) 700-4242.
by|Apr 6, 2019
Q:I'm using the Wirsbo pipe and expansion rings, are these fittings the same? i know the pipe is di...
by|Jan 30, 2017
1 Answer
Answer This Question
A: No, our fittings are only guaranteed when used with our PEX pipe and either the clamp or crimp system.
by|May 4, 2023
Q:are these sold one piece at a time
by|Nov 28, 2016
1 Answer
Answer This Question
A: Yes,, they are sold individually or in the 10 pack. The Home Depot sku number for the individual pack is 263739.
by|May 4, 2023
Q:Do u sell the crimp rings that go with th 3/4 brass fittings
by|Nov 2, 2016
1 Answer
Answer This Question
A: Yes, both the 1/2" and 3/4" copper crimp rings are sold at Home Depot. The sku number for the 1/2" is 639072 and for the 3/4" is 638146. You can ask the Home Depot associate to locate them by those numbers.
by|May 4, 2023
Q:I need under ground fittings/connectors for pex line. What should I use? . I was told shark bites are not approved for underground.
by|Sep 25, 2016
1 Answer
Answer This Question
A: SharkBite fittings and PEX Pipe are approved for use underground. All fittings should be wrapped with our SharkBite stretch wrap or pipe insulation. To ensure a proper seal, wrap tape 1” past each end of the fitting onto the pipe and cover the entire fitting, overlapping ¼” to 1/2” across the fitting. If you need anymore assistance please contact our customer service center M-F, 8am-5pm at (877) 700-4242.